While those don’t tell the full story, they can be useful if deciding to have your water tested at a lab.
Everyone should spend at least a few bucks to know what they will be drinking at home on a regular basis, IMHO.
Lab testing is going to be a waste of money for most people not using well water, unless you have a strong reason to suspect something is up aside from test-strip reaults. Especially seeing as how the water chemistry is going to change at least twice per year when the water provider switches from chlorine to the chloramines and vice-versa. And pretty much all providers will give you a report of exactly what’s in the water on a monthly basis if you ask for it.
Lab results would be useful if you’re serious about homebrewing beer and don’t want to build up the water profile from scratch or really into baking, though. Just don’t do it in the early Spring/Fall, because that’s when the treatment chemicals switch and the results aren’t going to be representative of what the water is really like for that time of the year.
My stomach is super picky and I drink a ton of water. It doesn’t take much to mess me up.
Even perfectly clean water will trigger my acid reflux, but that is more of a mechanical issue with my stomach, from what I understand. The bigger moral of the story here is not to be a raging alcoholic for many consecutive years…
I even get monthly water reports automatically due to the number of lawsuits my town has had because of water quality. Needless to say, my trust level is not set at maximum even for third-party reports paid for by the city.
You ain’t wrong, but the redundancy makes me feel better.
But it’s good enough for regular people. Very accurate test equipment costs tens of thousands of dollars and you have to recalibrate it every few months using very expensive consumables.
Nah. I paid $43 for my lead test via Virginia tech, as that’s a concern I have with my new (very old) apt building: https://leadkit.hbbf.org
If you need to test for the common 9 dangerous items test, it’s $160: https://mytapscore.com
IMHO, it shouldn’t need to be. With test strips, my only intent is to see if there is something drastically off kilter. pH tests are likely the most reliable of any of them. If tap water pH is wildly off, there is likely something else wrong.
Excluding some cases, just a taste of the tap water should tell you volumes more than what a test strip might.
