Hi folks, I’ve been working on this keyboard pretty much since January of this year, and I’ve finally got it to the point that I can call it done! If you’d like to build one, all files are available here.
This is an MX-based keyboard, 36 keys with integrated trackball. The github page has a bunch more details. I also have a choc version in dev using the same style that’s based off the Trinidox.
Let me know what you think!
Nothing out if the normal. I’m a big fan of tree supports, but aside from that it’s just a standard layer height for a 0.4mm nozzle. Temp will depend on the type of filament you decide to use. I have to admit, I’ve had my printer for around 2 years and I’ve gotten by with learning very little about it and doing almost no maintenance… I’m somewhat paying the price now because the thing is giving me nothing but trouble 😭
Excited to see how it looks!
Ah. I think I overdid it. I am.printing a first test in black PLA, with 0.2 mm layer height. I chose normal supports, because tree supports only generated three or four supports and I feared that would not be enough. Because I read it somewhere as a tip for Dactyl shells, I went with 100% infill. This will be one massive shell and a lot of cleanup work, when it is finished!
My first test print:
Came out OK with a few caveats,
- Way too much support material
- A few warps and a horizontal line from where I paused the print overnight
Looks pretty good! I remember the pain of removing normal supports… Your picture of the removed supports with the pliers reminded me, hehe. With tree supports, it comes out in about 30 seconds as one giant blob. Usually I have a blob laying around but I recently cleaned up. Have you printed a temp tower with your new printer? Might help to really dial in the temp for some of the overhang areas.
