This has been a gratifying addition to the estate. When the garden works, sometimes it REALLY works. Of course neighbors get some overflow, but their gardens tend to be working too. Nothing would go to waste if we did not harvest, of course, but all kinds of dried stuff is nice to have: tomatoes, herbs, banana slices, mango slices, kale leaves - those are our top uses.

This is a simple design inspired by inheriting two suitable glass panes. It is a simple box with 1x6 plank sides (to make total “depth” of 11 inches (28cm). The “bottom” is a thin sheet of galvanized steel. Interior is painted flat black and it gets quite warm in there - I should measure some time.

You are viewing a single thread.
View all comments View context
1 point

yes, a vent stack; it helps air flow. There are three two-inch (5cm) holes at the bottom end to admit air. An earlier iteration of this design had screens over the holes to keep critters out, but it turned out to not be an issue so we have not screened the holes on this unit.

We saw a design for a solar dryer popular with Peace Corps volunteers - a heat-collector box with a small dryer compartment on top and three little trays in a stack. But I thought, why not put the dryer trays right inside the heat collector? I just checked the temperature and with partly-cloudy skies, it is 50C in the box.

permalink
report
parent
reply

Do It Yourself

!diy@beehaw.org

Create post

Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!

Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.


This community’s icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

Community stats

  • 87

    Monthly active users

  • 161

    Posts

  • 1.2K

    Comments