Hello All,

I have an indoor stairwell that I want to have motion activated light sensors installed on. My issues are as follows: the first 10 steps have two wood baluaters on each side that run from the flat step itself up to the handrail (i.e there is no wood on the sides of steps for me to stick a light sensor to). I was thinking I could try to do some sort of LED strip lighting across each step but the other issue is I have carpet running through the middle of entire stairwell (with a few inches of exposed wood on the sides of each step).

Anyone have any ideas or solutions for these issues?

Thanks in advance!

You are viewing a single thread.
View all comments
1 point

This might work for you in the case where you have no mounting platform for a decent distance.

Stair Light Video

permalink
report
reply

Home Automation

!homeautomation@selfhosted.forum

Create post

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

  • No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
  • Referral/affiliate links are NOT ALLOWED!
  • NO POLITICS! There are plenty of other communities to discuss them; this is not one.
  • When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
  • Crowdfunding links are not allowed.
  • Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

Community stats

  • 2

    Monthly active users

  • 598

    Posts

  • 2.8K

    Comments

Community moderators