There are a lot of reasons not to give them your money. They’re assholes to the maker community and they openly talk shit on a lot of their customer base. That’s beside the point, though, really.

It’s just not a spectacular option for hosting. In order to get a Rpi competitive with even the shittiest laptop from 7 years ago, you’re going to end up spending more than you would spend on a decent laptop from 7 years ago.

If it is a computer that turns on, it will likely function orders of magnitude better than an Rpi and won’t bind you to ARM architecture. My entire hosting setup was pulled out of a recycling pile for free. Install ubuntu/ubuntu server and enjoy yourself.

If you intend on spending any amount of money on this hobby, I cannot express enough how much I recommend against any of that money going toward a Raspberry Pi.

EDIT: A lot of you seem to be reading this as “Raspberry Pis are all nonfunctional” and getting mad about it. Don’t do that.

Edit 2: Good to see that all the stupid parts of reddit made it here

You are viewing a single thread.
View all comments
102 points

You seem to have conveniently left out power consumption.

I agree they are very pricey these days. Are there any competitiors that offer cheap low-power consumption computers?

permalink
report
reply
-10 points

You’d probably be shocked at how close a 65w supply charging a laptop battery at trickle voltages and a 2A 5v power supply maxed out 24/7 can come to each other

permalink
report
parent
reply
20 points
*

Do you have some source for that?

I can’t see an old laptop running 24/7 as being close to a raspberry pi performing the same tasks.

permalink
report
parent
reply
-1 points
*

P=V x I

65W ≠ 5V x 2A

permalink
report
parent
reply
12 points

An RPi doesn’t max out a 2A 5V power supply unless its under heavy load. Idle is closer to half an amp.

permalink
report
parent
reply
-30 points

If you’re hosting a server, you’re not going to get much idle time.

permalink
report
parent
reply
31 points

It will not be that great like on Raspberry Pi, but Mini PC are also very low on energy. For example,. Wyse 5070 with J5005 idles around 3-5 W, which is really great. i had HP 800 Mini G3 that idled ~7-8W. Mini PCs are more powerful, expandable and can use normal SSD Drive. For selfhosting they are better, but in some places Raspberry Pi (or alternative like Orange Pi) will be better, especially when you need something small and really low power

permalink
report
parent
reply
11 points
*

I never heard of the orange pi!

Some of the models are very cheap. Have you tried them? If they are as reliable, I might get myself one for a couple of projects.

permalink
report
parent
reply
5 points

I tried one ~5-10 years ago and the idea was good but it didn’t have nearly the level of support that Raspis have.

permalink
report
parent
reply
11 points

Yes. I have Orange Pi Zero 2 with 1 GB of RAM running Ubuntu. This is actually very powerful machine, more powerful than my Raspberry Pi 3B+. i bought it for about 180 polish zloty (around 40 euros). I use it for printing server with Ghostscript printer app installed via Snap. I also tried Wireguard and MongoDB - everything works fine. it works really well, but it sits around 50 C on CPU, so it can get hot.

permalink
report
parent
reply
3 points
*

I got an 1 gig Orange pi zero 2 with a 2 port USB expansion board. I got it from ali express with a 32gigabyte micro SD card, USB to USBC charging cable for like $40.

I 3d printed a case for it. Provisioned it with a heatsink, fan, 18W USB power supply, and a UPS.

I use it as an octoprint server, the extra USB ports go to a webcam and a fan if i feel like it. It’s been reliable but I’ve only had it a month. Transferring jobs is nearly instant plugged into gigabit ethernet. Transfer is via API key not web interface. Seems to do alright in the CPU department. It has to parse some of the larger jobs for a minute.

Prints perfectly. Only had one resent packet USB packet so far. After it prints rendering out 1080P time-lapses was slow. It would hit like 70% cpu usage and take hours. Rendering out 1080P octolapses with fewer frames and less movement would hit 98% cpu use but be done very fast - like 10 min.

They just announced an orange pi zero 3 with a similar form factor (but not exactly the same) and larger faster memory.

permalink
report
parent
reply
12 points

I had some good experience with the pine64 boards!

permalink
report
parent
reply
3 points

Oh never looked into those, thanks!

I wanted to get something to use as a NAS server and/or a pi-hole.

permalink
report
parent
reply
4 points

Sure, yw :) There are also NAS cases for some of the SBCs, but I guess you can also go cheaper without a dedicated case and go with some icybox which allows you to connect some disks (jbod or RAID) via USB 3. So many possibilities!

permalink
report
parent
reply
22 points

Yeah, power consumption is never talked about enough when talking about that type of hardware. I do have an old PC I could use as a server, but I don’t need more heating at home. Mini-PCs are cool, but how cool are they?

But anyway, I haven’t been able to buy a RPi at decent price in years, so 🤷🏻‍♂️

permalink
report
parent
reply
6 points

You can use a thin client PC, which is usually uses <10 watt. Pi is even lower though, usually <5 watt.

permalink
report
parent
reply
7 points
*
Deleted by creator
permalink
report
parent
reply

I’ve been happy with the libre computer LePotato. It’s similar to a pi board.

permalink
report
parent
reply
7 points

I thought you were joking, it’s actually the real name. xD

permalink
report
parent
reply

It’s an absolutely silly name. The hardware is solid, costs less than an RPi, and I’ve been happy with the support I’ve received from the mfgr.

permalink
report
parent
reply
24 points
*
Deleted by creator
permalink
report
parent
reply
5 points
Removed by mod
permalink
report
parent
reply

Selfhosted

!selfhosted@lemmy.world

Create post

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.

Rules:

  1. Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

Community stats

  • 4.8K

    Monthly active users

  • 3.6K

    Posts

  • 81K

    Comments