FIXED thanks all, installed Ubuntu which fixed it. Much obliged to all comments :-)

——————————————————

I may give it up, but just playing with an old laptop and looking at linux for the first real time and of course, the old laptop happens to have this network adapter… 🤦🏻

(BCM4313 802.11bgn). From the rabbit hole it’s a typical case, laptop tethers to phone fine. Ethernet during Debian 12 install (kde plasma). Detects my wifi but won’t connect (deactivated message).

In theory it should have been as easy as:

HTTPS://wiki.debian.org/wl or https://wiki.debian.org/brcm80211

Has to be the stupidest thing…

configuration: broadcast = yes driver = brcmsmac driverversion = 6.1.0-13-amd64 firmware = 610.812 ip = 172.20.10.5 latency = 0 link = yes multicast = yes wireless = IEEE 802.11

3 points

But at step 4, wl.ko does indeed exist lol

  1. (Optional) Check all the built DKMS kernel modules. There should be “wl.ko” in the list.

Pretty sure that’s how it’s supposed to be, especially since you just installed it in step 2. I don’t see your problem here.

permalink
report
reply
2 points

Thanks for your reply :-) – I just assumed that would be an issue as I go on to complete step 5 and 6 and still the same thing. I can see the wifi network and attempt to join and it never configures. Fun times

permalink
report
parent
reply
1 point

sorry I read that as wl.ko should not be the list. I need to edit my post haha

permalink
report
parent
reply
1 point
*

We should tell people to post the relevant lines from the dmesg command, too. It usually tells if a killswitch is set or the module didn’t get loaded (properly).

Good luck with your old laptop 😄

permalink
report
parent
reply
2 points

So, you’re talking about ensuring the wl driver is loaded, but the dump at the end of your post says it’s using brcmsmac, a different driver for the same card. Looks like you have a mix of both now? It looks like https://wiki.debian.org/wl has a little script you can use to switch between the two, maybe try that.

permalink
report
reply
1 point

Isn’t there a separate package with firmware? Maybe install firmware-brcm80211, firmware-misc-nonfree or something like that?

permalink
report
reply
1 point

firmware-misc-nonfree

I got - firmware-misc-nonfree is already the newest version (20230210-5).

& for firmware-brcm80211 I got - firmware-brcm80211 is already the newest version (20230210-5).

permalink
report
parent
reply
1 point

I just installed a broadcom 4xxx driver in KDE Neon a few days ago. The first few instructions I found didn’t work, something like *-dkms and *-source. But then, I found the command below. did you try:

sudo apt-get install bcmwl-kernel-source

permalink
report
reply

Linux

!linux@lemmy.ml

Create post

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word “Linux” in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

  • Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
  • No misinformation
  • No NSFW content
  • No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

Community stats

  • 7.7K

    Monthly active users

  • 6.5K

    Posts

  • 179K

    Comments