I guess my ISP uses some subpar hardware because the connection keeps dropping at peak hours. I want to implement a failover system without having to buy some expensive router which I would not be able to justify with my normal usage.

Wanted to know some other ways how people do it .

1 point

If I absolutely must keep working and a “sorry internet is down will be mostly unavailable” wont suffice for work, I will tether to my work phone… or in an absolute pinch, my personal phone.

There’s also a starbucks and a few other free wifi hotspots I can go to within a short drive or even walking distance.

I suppose I could bring in a second ISP but I would really only do that if the maximum speed I could get from my ISP was too low and/or a faster speed from the ISP was similar in price (preferably less than but possibly a little more expensive) to doing a similar speed using 2 ISPs.

Where I am, my internet costs me $70/month for gigabit… its their highest tier and their lower tiers suck (100mbps for $55 and 400mbps for $60) but I dont really need more than that… if I wanted more, I could switch providers and go to Comcast and get 1.2Gbps for $85 per month but I’d probably bring in either Comcast’s 75mbps tier for $20 or 200mbps for $35 first.

Technically it’d cost a bit more at $105+tax vs Comcast’s $85 but with Comcast Id have to pay $30 for unlimited bandwidth or $25 with their rented hardware since I somewhat regularly exceed 1.2TB of data transfer per month.

My current provider has no cap, is more reliable in my area and there are less restrictions on my their network (e.g. in addition to the lack of bandwidth usage cap/charge, I can and do run multiple public IPs and I have no port restrictions though admittedly the handful of ports comcast blocks wouldnt really impact me) and it would provide me redundancy for only a slight increase in cost (actually slightly less when you tack on the bandwidth fees with or without renting their hardware which I absolutely despise)…

My setup would probably utilize a Vyos VM as an edge router since its how Im currently connected but really many off the shelf home routers will support converting one of the LAN ports to a redundant WAN port, especially if you can use WRT firmware variants (Tomato, DD-wrt, OpenWRT, etc).

permalink
report
reply
1 point

My network failover setup is kinda complicated, im using a Prepaid LTE here in Philippines and use it as my backup internet.

My aim is to get that prepaid LTE data to auto subscribe to prepaid mobile data when my primary internet is down. First its going to auto subscribe to 5 pesos / 500mb allocation for 1 hour, if for some reason the internet is still down for 1 hour its going to auto subscribe to 99pesos / 8gb allocation, luckily that data allocation also comes with unlimited service of your choice, I choose youtube because thats what we use most, so that 8gb of data is actually more than enough for the household to get going.

all of that made possible with automation using Home Assistant, and the LTE router I got is a Huawei B312-939 and is compatible with Huawei LTE integration, and all the auto subscription automation are done via Send SMS call service via Huawei LTE integration. I also use home assistant to basically stop docker services on my NAS that is going to potentially consume a lot of bandwidth (like the transmission) while our primary internet is down and also start them back as soon as the primary internet goes back online.

And to maintain this setup, all I need is to top-up my prepaid lte sim with 3000 pesos worth (around 60USD) of credit and that’s good for a year, there are times in a year that internet is reliable for the entire year so that 3000 pesos is untouched and will be used for the next year but I still need to top-up at least 5 pesos to get the SIM to not deactivated due to inactivity.

permalink
report
reply
1 point

I just literally pay for two ISPs over different mediums, i have a lowish tier cable modem connection and then a sync gig connection over fiber. The latter is my primary, with the cable as a hot standby in my EdgeRouter 6P (Dual-WAN with failover only)

It’s worked great the times there has been an outage. I work from home so I just chalk this up to the cost of saving a commute.

permalink
report
reply
1 point

We’re almost in 2024. I’ve been on the Internet since 91. Today’s telco/network equipment come with error reporting via alarms / data pushed to centralized tools that usually highlight issues. If your ISP is subpart and can’t fix it’s network, can’t you switch to another ISP?

Also, have you done your homework and positive the issue doesn’t come from any of your equipment? Why not open a ticket w/ the ISP with all the proof on hand? Are they aware?

If you’ve done all of that work, that they are aware and “sit & do nothing”, it’s fair to post the name of that ISP right here!

permalink
report
reply
1 point

Unifi UDM PRO with a GL.iNet GL-X3000 (Spitz AX) 5G NR AX3000 Cellular Gateway Router for failover on the backup link. Separate providers for primary and backup. No MVNO.

permalink
report
reply

Homelab

!homelab@selfhosted.forum

Create post

Rules

  • Be Civil.
  • Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
  • No memes or potato images.
  • We love detailed homelab builds, especially network diagrams!
  • Report any posts that you feel should be brought to our attention.
  • Please no shitposting or blogspam.
  • No Referral Linking.
  • Keep piracy discussion off of this community

Community stats

  • 10

    Monthly active users

  • 1.4K

    Posts

  • 6K

    Comments