218 points

That’s nice. Let me know when they’re $30 again.

permalink
report
reply
61 points

Yea. I miss those days.

permalink
report
parent
reply
56 points
*

I wouldn’t expect that kind of price anymore except for the Zero models.

permalink
report
parent
reply
98 points
*

I don’t expect it either, which is why these things don’t make sense anymore, and why I actually recently passed them up for an X86 competitor. Prices of RPi’s have inflated, supply has gone down to nothing, and all the while all sorts of competition has entered the SBC scene that provides a much better value.

Don’t get me wrong, I love the RPi and I feel like a real cool nerd with bare PCBs sitting around my house, but they’re just too expensive now.

permalink
report
parent
reply
61 points

Yep. The initial idea was to have a cheap SBC, that you could give to an entire classroom without being worried too much if some of them break. 35€ are not exactly cheap, but doable. 80-90€ is simply not viable for that purpose anymore.

At the same time, for more serious projects, it’s lacking too many features like sata, pcie, etc., etc.

I feel like RPi is coasting on momentum, without a clear direction.

permalink
report
parent
reply
13 points

I’d rather have x86 tbh. Thanks for letting me know these exist.

permalink
report
parent
reply
10 points

A refurbished thin client from eBay. Or a refubed sff/usff.
They are pretty much the same price these days, and come with a case/PSU.
If you don’t need the GPIO and special connectors that a raspberry pi has, sff/usff is going to be cheaper, has upgradeable ram&sata and some have pcie3.0 slot.
Running pihole (let’s be honest, a huge reason people buy a pi)? Get a usff/sff, slap an SSD (probably the cost of a raspberry pi case/PSU/SD-card) in there and an intel i340-t4 4port NIC (this is extra. Can just use the onboard NIC), and install proxmox. Then run pihole in a VM. And now you have spare capacity to run a whole bunch of other fun things, with the safety net of snapshots and backups so if you mess up a config you can just roll another VM.

permalink
report
parent
reply
7 points

I was in the market for something low budget with two nics for a local firewall. Since this gave me a nice discount on top, I ordered a zimaboard now as it’s pretty much exactly what I need. Thanks for the tip

permalink
report
parent
reply
3 points

Damn. Looked decent until I got to $30 on shipping.

permalink
report
parent
reply
2 points

Oh cool! I didn’t know about this. Thanks for sharing.

permalink
report
parent
reply
7 points

That’s fine, but that means that it’s no longer anything special for a lot of the home server stuff a lot of people do with them.

There are loads of cheap, small (not as small, but small enough for most people not to care) used x86 systems (eg thinkcentre) that I can grab instead.

permalink
report
parent
reply
-5 points

The pi 4 is literally $35 right now. The original pi, adjusted for inflation, was $47.

permalink
report
parent
reply
20 points

The cheapest rpi that isn’t a zero or pico started at $35. You can buy a Pi 4 Model B 1GB for $35 on pishop.us right now.

The pi 5 won’t ever be $35 because that’s not the price point it was designed to hit. That’s why they have a range of products, so you can buy the one that fits your budget.

permalink
report
parent
reply
1 point

Can’t do much with 1GB. And the Pi4 isn’t part of a “product range”, it’s the previous generation product.

permalink
report
parent
reply
14 points
*

Of course the pi 4 is still part of the product range. It’s still being actively manufactured and sold. Same for the pi3.

As far as memory size, that wasn’t part of your original complaint. You want a $35 computer, that’s how much you get. The original pi was $35 and had 256mb of ram.

-edit also, $35 in 2012 is $47 today with inflation. The pi 4 is a crazy good deal and readily available. This complaint just has no merit.

permalink
report
parent
reply
8 points

You can get the zero 2 w for 15-20

permalink
report
parent
reply
1 point

Yes that does seem like a compelling proposition but also a very different product.

permalink
report
parent
reply
77 points

The Pi foundation showed their true colors. Don’t continue to support them.

permalink
report
reply
41 points

What did they do, I’m out of the loop?

permalink
report
parent
reply
117 points
*

Completely abandoned their original hobbyist customer base and sent all their inventory to B2B sales channels and scalpers for several years.

And now that they’re finally providing B2C vendors with stock, they’ve jacked up the prices by 100% to 300%.

Don’t forget the Raspberry Pi foundation was supposed to be a nonprofit and the only reason they’re the premier SBC is the community. Other boards have better specs, at a better price, with better features. The community support, the hobbyists, are the primary reason why they are what they are.

That’s just one bad action, but their had been plenty others recently. Some other comments here have provided information you should read, such as hiring police officers who specialized in using Pi’s for surveillance…

permalink
report
parent
reply
13 points

Also if you get a slightly bigger form factor, you can just buy a much better one.

permalink
report
parent
reply
5 points

I’ve been feeling this as well. I’m not too into the Pis but I have one on my shelf for a “one day” project. Looking at the pi5 it’s way too expensive I feel like it’s lost its true niche and sold out being “too mainstream”

I need to look further into single chip computer things cause I’ve seen some competitors come out on my feeds. Hoping there’s an affordable alternative to the Pi5 that beings back the Pi3 feeling.

permalink
report
parent
reply
5 points

Tbh I can understand why they dedicated all of their stock to industrial customers instead of individuals. If back then they’d put all of their stock on the open market, it would’ve been scalped instantly. But what’s even more important is that there are businesses who’s products rely on the Pi being available, and tbh I’d rather have businesses using a Pi for their products instead of having to switch to a proprietary solution that nobody can service in 5 years.

Also: if you ever really needed a pi, you could’ve asked them via e-mail and they’d hook you up with one or a couple

permalink
report
parent
reply
3 points

Damn that sucks. I appreciate raspberry pis but unfortunate to hear all this

permalink
report
parent
reply
-7 points

The price is more or less the same as it’s always been, where is this nonsense 300% coming from? Are you quoting scalper prices as retail?

permalink
report
parent
reply
-43 points
Removed by mod
permalink
report
parent
reply
71 points

The 3B+ was probably the high of the raspberry pi. It is still pretty much unrivaled in terms of idle power consumption and energy efficiency (or at least i have not seen any other SBC that got below 0.5 Watts on idle) on the consumer market.

But i have trouble investing further into them.

  1. They do not post any update guides for newer Debian releases and basically only support new deployments.
  2. It looks like they are abandoning their older products. vcgencmd for example is still broken on the 3B+. Since they “fixed” it for the 4B. See https://github.com/raspberrypi/firmware/issues/1224
permalink
report
reply
25 points

I agree that the 3B+ was the best Pi but for other reasons:

  • The Pi 3B+ had the perfect balance between performance and price with the performance being good enough at the time.
  • Design flaws at launch. Remember the Pi4 CC1 & CC2? POE getting pulled from the market?
  • Pi5: 5V 5A USB-C??? There is now 45W USB-PD (@15V) that would be compatible with generic PSUs but they went proprietary with 5A@5V.
  • They put big customers first and let everybody else starve during the shortage. This forced me to alternatives and I have to say they work just as good and cost less.
  • Jacking up retail prices: Even Intel x86 is now cheaper than a Raspberry Pi.
permalink
report
parent
reply
8 points
  • Pi5: 5V 5A USB-C??? There is now 45W USB-PD (@15V) that would be compatible with generic PSUs but they went proprietary with 5A@5V.

Was not even thinking about that. Implementing USB-PD is so easy these days. Basically just putting a chip there who handles the PD and then a step down(or whatever) converter which they already have anyway. (See ebay USB PD trigger for implementations)

That is so dump.

Talking about hardware flaws, i think they even fucked up the USB-C implementation on the PI 4. They put the resistor on the wrong pins or somthing. Dont remeber exactly.

permalink
report
parent
reply
3 points

I think operating at 5V input might be a technical constraint for them. Compatibility revisions for existing hardware are a lot more difficult if the input voltage is 9x higher. Addressing that isn’t as easy as slapping a buck converter on the board.

Not saying requiring 5A was the right call, just that I can see reasons for not using USB-PD.

permalink
report
parent
reply
1 point

They used 1 resistor for CC1 and CC2. The fix and correct implementation was to use one resistor per CC-line (two in total).

permalink
report
parent
reply
5 points

Picked up a laptop with a busted screen $30 cheaper than the RPI 5. 1135G7, 8gb upgradable ram, m.2 storage, wifi, bluetooth and a battery.

Raspberry pis’ were great early on, but their appeal has quickly diminished in my eyes considering used hardware options that are available now.

Size would be the one redeeming quality of a raspberry pi for me, my headless laptop is thin but takes up substantially more space.

permalink
report
parent
reply
68 points
24 points
Deleted by creator
permalink
report
parent
reply
60 points
*

Pi 5 sucks massive balls.

They now require a special power supply for it to work else it just crashes under load. Their use of USB C is insanely confusing because it doesn’t work with any normal USB C psu.

This power supply costs 15 bucks which conveniently isn’t included in the price. Also a heat sink that costs 6 bucks.

Also they stuck with micro hdmi which sucks. (even more special accessories needed)

The required accessories almost cost as much as just an old pi.

I hope the community jumps over to Rockchip based boards soon. Pi has taken the communities open source efforts and spit in their face.

Risc5 is also interesting but that seems to be a far bigger task since it need recompilation of a lot of existing stuff

permalink
report
reply
25 points

Wow, at the start of this comment i thought you were just being overly negative, but one by one, each point crushed me a little more. it’s so sad what’s become of this once great little product. The special power supply is a complete and total deal breaker for so many reasons. that eliminated so many use cases for me. And the lack of a standard hdmi port (or even usb c video output) is just the shtty cherry on top.

permalink
report
parent
reply
17 points
*

Yeah power seems like such a small thing but for an SBC it’s a pretty big deal.

The power usage is also pretty crushing for it the Pi’s usage in hobby Robotics. Finally we have some computing power but now it’s unusable because how are you going to get 5V5A from a powerbank? We could power the Pi4 from a decent USB C supporting powerbank, But this is no longer the case for the Pi5.

If they supported “normal” USB PD then at least a powerbank with quick-charge support (9v3a) would work and give you the same total 25W wattage. And the PD USB chargers would have been way cheaper because 9v3A get mass produced. This 5V5A is some Apple tier of “propriatary” standard and I really wonder why they did it.

permalink
report
parent
reply
11 points
*

Even the recommended 5V3A supply for the Pi4 is non-standard and requires you to either buy the official power brick or wade through a sea of sketchy Chinese knockoffs that may or may not deliver their rated power. I don’t understand why they haven’t explored alternative connectors or slapped a voltage regulator on the board in order to use a 12V supply. 5V5A USB is just ridiculous. USB only makes sense when you’re using universal requirements, but this might as well be a barrel connector as you can’t use any normal USB charger with it.

permalink
report
parent
reply
1 point

But it does support usb pd, starting with pi 5, you can use any usb pd power source, so long as it can provide the needed wattage

permalink
report
parent
reply
7 points

Is there a RasPi alternative that’s competitive in price and has PCI-e support? It’s been a dream project of mine for quite some time to pair an ultra low power SoC to a GPU in order to make a crazy overpowered Folding@Home or BOINC cluster.

permalink
report
parent
reply
6 points
*

I could say the Orange Pi 5, however Orange Pi’s ports currently tend to only work with specific accessories which they already wrote drivers for themselves. It’s not like they’re blocking other devices, but just like how RPI still needs a lot of work to support GPU’s with drivers, Orange Pi probably needs even more.

The integrated GPU is pretty good though.

Most alternatives to RPI use a Rockchip such as the RK3566 for mid range and RK3588 for high end stuff.

There’s also the new cheap 15 bucks LuckFox Pico with Rockchip RV1106 with a small NPU for AI projects, kind of a Pi Pico alternative.

permalink
report
parent
reply
1 point

I’d recommend Orange Pi 5 plus. It’s much more expandable than OP 5.

permalink
report
parent
reply
0 points

Thank you for your recommendation. I’ve looked at some of those SoCs and they’re impressive but none of them do what I’m looking for. I want to make a graveyard for my old GPUs, but without the power overhead I have right now with them configured as essentially a mining rig that’s folding proteins instead of guessing the hash. I understand that the potential power saved by using ARM or RISC over x86/64 is a few dozen watts at best and chosing an SoC over a desktop platform hamstrings any opportunity for scaling, but it’s been a dream project of mine for quite some time. It doesn’t have to be practical.

Whenever I am doing different projects I go with RasPi alternatives. I agree they’re cheaper and superior.

permalink
report
parent
reply
6 points
*

What non standard thing are they doing with the power supply? The PSU looks like a regular usb c PD supply to me (even supports 12v, nice!)

Edit: wtf! 5v@5a yeah thats non standard. What were they thinking?

permalink
report
parent
reply
0 points

I’m assuming it’s like the Nintendo switch USBC lead which technically is standard but doesn’t really work to charge anything else. but at least you can use normal USBC leads to charge the switch so it’s not too bad.

permalink
report
parent
reply
2 points

Well, I don’t expect more from ot rather than low-power home server.

permalink
report
parent
reply
1 point

the community’s* open-source efforts

permalink
report
parent
reply

Open Source

!opensource@lemmy.ml

Create post

All about open source! Feel free to ask questions, and share news, and interesting stuff!

Useful Links

Rules

  • Posts must be relevant to the open source ideology
  • No NSFW content
  • No hate speech, bigotry, etc

Related Communities

Community icon from opensource.org, but we are not affiliated with them.

Community stats

  • 5.1K

    Monthly active users

  • 1.7K

    Posts

  • 29K

    Comments