In this video, a Canon print cartridge is opened up and revealed not to contain the meagre 11.9 ml (0.4 fl oz) of ink it is advertised. The proposed solution is to buy a printer designed to be manually refilled with bottles of ink (such as the featured Epson EcoTank ET-2850), though it has only been tested briefly.
I feel like a Brother laser printer is a much better solution unless you specifically need color. Also, if you try and print with a laser printer after a couple months of disuse, it should fire right up and print. The same is not necessarily true of an ink jet, where things may have dried out and clogged.
My biggest problem has been that the ink always dries up, since I don’t print very often, and a laser printer has solved that for me. Now, about 3 years later, the black toner is still at 90%, and still working reliably.
My Brother laser printer has told me that my toner is empty three times now for the same cartridge. It eventually refuses to print, but that can be overridden with some undocumented trickery. I have manually overridden it each time, told it that I installed a brand new XL cartridge and it just keeps printing. It just told me, again, that the toner is low - I don’t believe it, I’ll override it again. It would have forced me to throw out at least 66% of the remaining toner if it didn’t have the override.
The cost effectiveness difference on the bottles versus sponges is probably much bigger than the video suggests, because a whole bunch of ink is likely sticking to the sponge and never coming out.
I’ve always ordered ink from inkjets.com because it’s cheap and their cartridges are completely clear so you can actually see that they’re full of ink like you’d expect.
FStoppers - Printer ink, it’s a sCaM
Next week - Potatoes, they’re a rOoT vEgEtaBLe
Here is an alternative Piped link(s): https://piped.video/watch?v=eOMjeCiMn8g
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.