I’m building a NAS for the first time on my own, so I wanted to share the story so far here.

I’m not a stranger to custom builds, in fact I don’t think I ever bought an assembled PC (not counting second hand 386 box a million years ago). But this is my first small, low power build, so it’s not perfect, I already ran into a wall (more later).

I base the build on an AsRock mini-ITX board, the CPU is included, it’s passively cooled, low power consumption but still powerful for a NAS. I’m sticking it into a Node 304 Fractal Design case. Here’s the full list of parts I got:

  • AsRock J4125-ITX board with a Celeron 4125 (4-core CPU)
  • 8GB DDR4 RAM (a Crucial kit)
  • a 500GB NVMe SSD (which I can’t use)
  • a couple of Seagate IronWolf 4TB drives
  • 90W PicoPSU and some no-name power brick
  • Fractal Design Node 304 mini-ITX case.

I planned to have an SSD for OS, these two disks for my photography and media, and then later on expand with more storage (preferably SSD, when I can afford it).

As mentioned, I messed up: the M2 slot on the motherboard is a “Key E” slot. I never bothered with these keys before, so I didn’t know that a Key E slot does not have a SATA protocol, it won’t take my SSD.

Another thing, the PicoPSU is a 20-pin power supply, and the board has a 24-pin slot. It should still be fine, the specs say that this is still okay, but I’ll have to see. According to my back-of-the-napkin calculations, 90 Watts should be enough power for the mobo and CPU, the SSD and the two spinning disks.

Anyway I’ll get a regular SATA SSD tomorrow and see how it’s shaping up. Let me know if you want me to post more on my progress/end result or if you have any questions.

8 points

Ha. I thought that piece of red was some sort of meat in a vacuumpack

permalink
report
reply
2 points

Yes, it didn’t inspire confidence when it arrived so, but it’s actually a tiny PSU, it’s essentially all bolted onto the power connector :)

permalink
report
parent
reply
3 points

Yeah that makes more sense. But with power, better a bigger block than just enough power. I read somewhere that a powerunit works better if it has more left then just enough

permalink
report
parent
reply
1 point

Well, yes, kind of. More power means the PSU or the power adapter is heating up, generating more losses. Closer to their top power, it’s also a bit spikier. You have a bigger reserve for spikes.

The downside is a slightly higher power draw (in absolute values, it’s negligible, but in comparison, it can be a double-digit percentage difference).

I’ve been reading a bit, and I believe that my setup won’t exceed 50 Watts, maybe a bit more if I add two more spinning disks. It should be quite a good match, I think.

permalink
report
parent
reply
2 points

What a sexy looking project. I really wish I could get rid of my Synology and just build a whitebox NAS. I got mine sadly from work for free so I could not justify the cost of building one. I could sell it off on ebay though 🤔

I cant wait to see some pics when you are done with the build!

permalink
report
reply
2 points

Thanks! Yes, getting some hardware work done is always exciting, like a kid with a new toy!

You’re right, the cost is about 320€ without the disks, not something to throw away if you already have a working solution. But if I wanted to wait and get used parts (like case, board etc) and only get new disks, it would probably be even cheaper. I left a cost breakdown in a comment above somewhere, if you want to do some calculations and sell off that Synology. You would probably need to add some money anyway, but hey, that’s why we have jobs so that we can have toys :)

permalink
report
parent
reply
2 points

Any reason you chose that cpu?

permalink
report
reply
2 points

Yes, in fact! Two main reasons.

  • I wanted low-power, this is mostly gonna sit in the closet and serve files around. Even ARM CPUs like the RasPi can do that. But I didn’t want it to be too weak, in case I wanted a simple service or two, this still has extra oomph. This isn’t too powerful, but it is a 64-bit x86 CPU.

  • I also wanted some ports. This has 4 SATA ports. It’s supposed to be a NAS. It has a Gbit ethernet - I don’t have a Gbit network at home so this is good enough for now, and I can expand it somewhat. It has USBs, expansion slots etc.

  • those two combined resulted in a few selections, AsRock’s mini-ITX boards with integrated CPUs are quite good choices in this space.

  • I wanted low power consumption. I could have gone with a slightly stronger ‎J5040-ITX perhaps, but it’s also using just slightly more power.

  • it’s also cheaper, the mobo with the CPU cost me 120€. The j5040 I mentioned would be a bit more - not a lot but still noticable.

  • I wanted silent, and this board and CPU is passively cooled. If I had money, I would get SSDs for storage as well (less power, less noise) but it’s a LOT more expensive.

I know there are other CPUs in this space but in the end you have to pick one so I did.

permalink
report
parent
reply
2 points

i use the same case for my own wifi ap/internet router & firewall/nas; it doesn’t work will with pata drives if you have too many sata like me.

permalink
report
reply
1 point

pata

How old are those? :)

permalink
report
parent
reply
2 points

Older than most fediversers and I think the fact that they’re still working at providing me internets and backups says something. Lol

permalink
report
parent
reply
2 points

That’s the same exact case I chose for my nas

permalink
report
reply
2 points

How did you find it for cable management?

permalink
report
parent
reply
2 points

Pretty terrible tbh

permalink
report
parent
reply

Hardware

!hardware@lemmy.ml

Create post

This is a community dedicated to the hardware aspect of technology, from PC parts, to gadgets, to servers, to industrial control equipment, to semiconductors.

Rules:

  • Posts must be relevant to electronic hardware
  • No NSFW content
  • No hate speech, bigotry, etc

Community stats

  • 223

    Monthly active users

  • 474

    Posts

  • 1.4K

    Comments

Community moderators