Hello,

Either my web search terms are quite inadequate, or perhaps no one ever wants a conveniently pre-wired holder for batteries connected in parallel.

Tried at standard (USA) sites like DigiK-- and Mous–. The in-series 2xAA=3V, etc., are even available at general merchandise retailers as shown in this pic from an A—zon listing.

Would appreciate comment.

6 points

Exist but pretty rare or you have to solder them yourself. Here’s one I found on Amazon https://www.amazon.com/Plastic-AA-Battery-Holders-Block/dp/B01MQY5JZX

permalink
report
reply
1 point

Here’s some other really cool ones that you also can attach wiring to without soldering.

https://sciencekitstore.com/linkable-battery-holder-1-aa-with-binding-posts/

permalink
report
parent
reply
4 points

Yes. But you can just wire up one up yourself.

permalink
report
reply
2 points

You need a larger capacity? Why not a single C or D battery instead?

permalink
report
reply
2 points
*

I hope you know the consequences of having batteries in parallel? I mean, if they have different voltages you’ll get some current going between the batteries until they equalize. And the consequence of having one in reverse is probably also much worse than having them in series.

permalink
report
reply
1 point

Can you explain what are the consequences in laymans terms?

permalink
report
parent
reply
3 points
*

I don’t know. You’re connecting the two batteries. The one that has more voltage will charge the battery with less voltage. And because it’s just a strip of copper between the two, without significant resistance, it’ll happen fast. The thing limiting current flow is probably the internal resistance of the battery itself. And for example alkaline batteries, you’re not supposed to charge them.

I haven’t tried what exactly happens. AA batteries aren’t as powerful as for example Li-Ion batteries. So you’ll probably be alright. Maybe in the worst case one battery gets hot and smells funny. But I don’t think this will cause a proper fire. If it’s only a bit, it’ll get a bit warm and you waste some energy, that’s probably it.

If you connect one in reverse I’m not so sure anymore. I once had a rechargeable battery that was connected in reverse get really really hot and bulge. Once you do things like this with Li-Ion rechargeable batteries, I think you’re in the realm of starting a fire.

permalink
report
parent
reply
1 point

AA batteries are typically non-rechargeable, so there’s not much of a need for putting them in parallel

permalink
report
reply

Ask Electronics

!askelectronics@discuss.tchncs.de

Create post

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.


Community stats

  • 164

    Monthly active users

  • 223

    Posts

  • 1.8K

    Comments