See title. I have only very little tools so far, screwdriver with plenty of bits, hammer, drill. I’ve been thinking of buying more tools for general purpose home improvement. I like to work with wood, unsure what I will expand into later. Is a multitool a good fit for me?
If yes any recommendations what I want to look out for when buying one? If no any alternate recommendations?
Multitools do a multitude of things ‘ok’ - typically they will not be as good as a specialised tool, but in a pinch, if they are all you have to hand they will do just fine. If you are working at home, or in a workshop, I would suggest investing in the tools you need to do the jobs in hand and add to that tool kit as you need to.
I have a very small rented flat and an extremely tight budget. So maybe having something that does things ‘ok’ is appropriate for the situation? 🤔🤔
Ultimately, you know more about your situation than anyone else on here. Multitools can be a boon if you do not have access to any other tools, but they invariably are not as good as specialised tools - they are very much the jack-of-all-trades, master-of-none in the tool world… I would still, if you are on a very strict budget, suggest you get some decent pliers, a decent set of screwdrivers, a hammer etc, rather than sink ~£100 into a good and usable multitool (if you buy a cheap, Chinese one, it may not last/hold up if you use it robustly).
A small cheap tool set is going to save you money over a decent multi-tool and be much easier to use. One for the home, one for your transportation, and finally a multi-tool for when you’re caught with your pants down. Just make sure you know why you’re buying the tools you’re buying.
I wouldn’t settle for anything less than a Leatherman Signal or SuperTool if you intend to get any real use out of it.
In case you want to accumulate a toolbox, the rule of thumb is to buy the cheapest tools you can find that work. When one breaks, you know you use it enough to buy a quality one.
There are a few situations in which a multitool comes in super handy, and in most of those situations it’s nearly the only thing that’ll save you time and/or effort. But as a general tool, your better off getting other things first.
My advice for your situation would be a jigsaw. My “power tool journey” from standard home improvement into beginner woodworker so far has been:
- Electric Drill
- Hammer drill (houses around here are concrete mostly)
- Jigsaw
- Handheld Circular Saw
- Multitool
- Random Orbital Sander
- Mitre Saw
- Job-site size table saw
- Trim Router
I literally used a multi tool to cut off a stuck kitchen sink faucet nut last night so I’m a little biased at the moment. Used a cheaper Ryobi brand multi tool to get it done.
If you’re in the US, Home Depot constantly has the Ryobi brand on sale. They may not be the “best” tool but they are significantly more affordable and get the job done. I’ve had my set for about two years and it had “orbital sander, circular saw, multi tool, drill, reciprocating saw, and like 3-4 batteries. “
Thanks! Not in the US but I have been wondering which modules are good. And affordability is certainly a very big factor.
It depends on what you want to do and whether you think you’ll stick with DIY or not, but I note you say you like to work with wood. In that case you may want to consider saving a bit and investing in a drill/driver combo and a compact circular saw.
With those tools, a solid work surface, a framing square, some clamps, and maybe a jig or two once you get ambitious (don’t worry, you’ll figure it out), you’d be surprised how much you can build. Lots of us have made the mistake of climbing every rung of the tool ladder and regretting spending a lot of money that we could have avoided just by getting the right tools to start with.
I know you said you are outside of the US, but here is one example from a good brand (at least here, my team Red colleagues will have their own opinions). As you go down in quality the prices get progressively cheaper.
Again, I know it is hard advice when you are not sure how active you’ll be at the end of the day, but when it comes to high-use power tools, it is normally a good idea not to go cheap. But before anybody jumps on me – if you are only going to end up with the odd job here or there and you need to save money, this may be bad advice!
EDIT: someone else mentions a jigsaw. That isn’t a bad idea at all depending on what you’ll be doing.