Heya! I thought I’d mention that I’ve been doing a bunch of development on the optical Timex Datalink watches! I have been carefully sniffing data from the original Timex software with a logic analyzer, and have fully reverse engineered every Datalink protocol, the serial Notebook Adapter, and even the CRT syncing graphics! This means that every Datalink device, including every Timex and Motorola watch, all PDAs, and the funny e-BRAIN talking toy is supported!
For those that aren’t familiar, the Timex Datalink is a watch that was introduced in 1994 that is essentially a small PDA on your wrist. The early models (supported by this software) have an optical sensor on the top of the face that receives data via visible light.
The original data transfer method involves drawing patterns of lines on a CRT monitor for the watch to receive with the optical sensor. CRTs use electron beams that draw scan lines one-by-one from top to bottom, then it returns to the top and repeats for the next frame. This means that the electron guns turn on when its drawing a white line, and and turn off when its drawing the black background. This produces flashing light as the graphics are drawn, which is ultimately received by the optical sensor and decoded by the Timex Datalink device.
For laptop users, Timex also offered the Datalink Notebook Adapter. Instead of using a CRT monitor, the Notebook Adapter simply flashed a single LED light. This adapter is fully supported by the Timex Datalink software, and sends the same data as a CRT.
However, Notebook Adapters are rare and expensive now, so I reverse-engineered one! Here’s my timex_datalink_client Ruby library communicating with my DIY Datalink Notebook Adapter to emit data to a Timex Datalink watch!
And if you want to try the reverse-engineered CRT graphics, I got you covered! I reverse-engineered that, too!
As a fun tidbit, these watches are flight certified by NASA and is one of four watches qualified by NASA for space travel! Here’s a shot of James H. Newman wearing a Datalink watch on the Space Shuttle for STS-88!
Here is my Ruby library with all options for all watches reverse-engineered into a tidy model-based syntax!
Here is a Notebook Adapter emulator that is fully compatible with all Timex software on old and new machines, and also works with my library too!
And if you have an anchor that happens to contain an electron beam and wanna try it, here’s my library for drawing graphics to a CRT to transfer data!
This has all been done over months of careful effort with lots of VMs, Pentium machines, Windows 98SE, logic analyzers, and solving data puzzles little by little. On July 4th, 2023, I’m proud to announce that I have reverse-engineered every Datalink device with 100% feature compatibility! This is definitely a passion project by all means, and I thought I’d pop in and share this passion with y’all!
Enjoy!
Yo. This is incredible. I doubt I’ll ever have one of those watches but wanted to say how awesome of a job you did. You’re seen.
I owned one of these watches on the 90s in am ironman form factor. IIRC it was basically a rolodex (named and phone numbers), which was surprisingly useful before cellphones were mainstream.
This is awesome! Side note for Memmy users… how do you view all 7 images here? Not working!
Oh dear! I have them hosted on lemmy.world for this post, but every one of the photos (with the exception of the CRT example) is also on my GitHub repo:
https://github.com/synthead/timex_datalink_client
This is where the CRT example screenshot is hosted:
Here is an alternative Piped link(s): https://piped.video/watch?v=p3Pzxmq-JLM
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
This is fucking amazing.
You beautiful bastard! I had one of these and thought it was one of the coolest bits of tech I ever owned. Your post generated so much nostalgia over having to hold my watch in just the right aspect to complete the data transfer. I remember people watching me sync and being shocked (although that was perhaps at how much of a nerd I was to have one). I like to think they were reacting to the tech.
Very nice work! Now I just need to find my old watch…
I remember people watching me sync and being shocked (although that was perhaps at how much of a nerd I was to have one). I like to think they were reacting to the tech.
It’s hard not to be intrigued! I wouldn’t think twice about it!
If you happen to find yours (I hope you find it!), my Notebook Adapter emulator, with a bright white LED attached, is a significant improvement. It can sync a Datalink 150 watch several feet away! In fact, the light is so bright, that if you hold it too close to the watch, it’ll saturate the optical sensor and cause transfer errors simply due to its brightness. If you point the LED sideways, this fixes this issue and makes transfers work just about every time. Check it out:
This picture is from my timex-datalink-arduino GitHub repo at https://github.com/synthead/timex-datalink-arduino! Feel free to make your own!
In case you find your old watch, I made a little Discord server with a bunch of archived WristApps, sound themes, and software if you wanna join and pick through it :)
These watches where pure magic growing up. It’s awesome to see someone is still screwing around with them.
