IlTossicoB

Yes you need one. And the world Router is self explanatory.

You need to be deaf to not hear an HDD, and Helium one are generally very noisy.

I don’t use Plex, but for what i know:

" Limitations

When relaying a connection through us, there are limitations for the streaming qualities you can use:

- Free users are limited to 1 Mbps maximum for streams

- Plex Pass subscribers are limited to 2 Mbps maximum for streams

If the content you’re trying to stream has a higher bitrate, then your Plex Media Server will need to transcode the content down to fit the limitation. "

​

https://support.plex.tv/articles/216766168-accessing-a-server-through-relay/

​

Anyway, those are all stuff an integrated iGPU can do, for a much lower power consumption. The point is, it’s preferable avoiding spending more money in electricity bill and on HW to buy an external GPU.

All consumer Nvidia cards are limited by software to 1. Even a 4090. You need to hack the firmware and modify it to get more than 1 at the same time. Then with a Quadro card you are limited by the power. But it’s not worth getting a 200€ GPU for 5 transcodes when you can have an 80€ CPU that does the same with the integrated iGPU. Not only, why do I need an external GPU that idles at 20/30W more when my Intel CPU can idle at 1/2W.

External transcodes are limited to 720p, so it’s obvious your GPU is doing it fine. A G5400 can do around 21x1080p transcode at the same time, so 720p is probably double, for comparison.

You can switch to a generic desktop PC with a desktop Intel CPU. Or change your server for a generic chassis and popolate with a desktop motherboard and CPU from Intel.

Don’t worry, they have a lot of shelves too.

Are you living in the 90’? Hardware transcoding is a thing of the present.

You don’t need another GPU, you already have one, and a very good one as decoder and encoder. The iGPU on the Intel CPU.

Anyway, if you don’t plan to have VMs, the i5 is overkill, if you need a new system, the i3 still overkill but better, a G7400 would be another alternative. A dual core is fine, with 16GB of ram, 32 are overkill. Both the i3 and the G7400 would be fine, and would give you space for HW transcoding with the iGPU. For reference, an i3 13th gen is capable of 5/6 4k stream at the same time. External GPU like Nvidia desktop are limited to 1 transcode at the same time, you need an expensive Quadro to match the iGPU capability, no worth the money, and you would just add more power consumption for nothing.

Nice PSU, finally someone that understand that you don’t need 800W to run a NAS that idle a 10W.

As OS, i suggest to look into unRAID, is a Hypervisor that run on RAM, very light, easy to setup and maintain. It’s a pay software, but you can try it free for 30 days.

It is a meme post?

It’s an enterprise server, with dual sockets, a lot of cores and ram. Not built with power saving in mind. And not built to be used on a home.

Have you done any research before buying it? Probably no.

That is normal power consumption behavior. And you are lucky that it consumes not that much for what it has.

Sell what you have and buy a generic desktop computer. Voilà. If you already have a desktop or laptop that you don’t use at home, use it as your server and turn off the enterprise stuff.