ghost_laptop
gary_host_laptop@lemmy.ml
Joined
357 posts • 696 comments
Freedom is a synthetic enterprise, not a natural gift
I found out about the game because one of the devs or something is funding AccursedFarms AKA Ross Scott’s campaign against games as a service so he did a promotion of the game. I thought I’d share it, it reminds me of NationStates in a way, I’ll try to try it out, thank you for your help, I’ll message you if I do!
I used journalctl -k -f and this is the output, I’ve also tried dmesg and smartctl and replied with the output on other comments, and all show some kind of I/O error, I guess I’m fucked or can it be because of a bad cable or something?
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Sense Key : Illegal Request [current]
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Add. Sense: Unaligned write command
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 78 00 00 00 08 00 00
Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794616 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Sense Key : Illegal Request [current]
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Add. Sense: Unaligned write command
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 b8 00 00 00 20 00 00
Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794680 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
Apr 13 17:06:59 fedora kernel: ata2: EH complete
Apr 13 17:19:28 fedora kernel: ata2.00: exception Emask 0x50 SAct 0x400 SErr 0x30802 action 0xe frozen
Apr 13 17:19:28 fedora kernel: ata2.00: irq_stat 0x00400000, PHY RDY changed
Apr 13 17:19:28 fedora kernel: ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
Apr 13 17:19:28 fedora kernel: ata2.00: failed command: READ FPDMA QUEUED
Apr 13 17:19:28 fedora kernel: ata2.00: cmd 60/00:50:38:e3:9d/01:00:39:00:00/40 tag 10 ncq dma 131072 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Apr 13 17:19:28 fedora kernel: ata2.00: status: { DRDY }
Apr 13 17:19:28 fedora kernel: ata2: hard resetting link
Apr 13 17:19:31 fedora kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 13 17:19:31 fedora kernel: ata2.00: configured for UDMA/33
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Sense Key : Illegal Request [current]
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Add. Sense: Unaligned write command
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 CDB: Read(16) 88 00 00 00 00 00 39 9d e3 38 00 00 01 00 00 00
Apr 13 17:19:31 fedora kernel: I/O error, dev sdb, sector 966648632 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 1
Apr 13 17:19:31 fedora kernel: ata2: EH complete
It’s extremely long so I just copied a bit, but I see some errors regarding the ata bus I think.
[52308.201967] I/O error, dev sdb, sector 1028431352 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52308.201989] ata2: EH complete
[52308.289440] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
[52308.289447] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52308.289449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52308.289452] ata2.00: failed command: READ FPDMA QUEUED
[52308.289454] ata2.00: cmd 60/e0:08:38:86:95/00:00:04:00:00/40 tag 1 ncq dma 114688 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52308.289459] ata2.00: status: { DRDY }
[52308.289462] ata2: hard resetting link
[52311.606437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52311.663188] ata2.00: configured for UDMA/33
[52311.663205] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52311.663209] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current]
[52311.663211] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
[52311.663214] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 04 95 86 38 00 00 00 e0 00 00
[52311.663216] I/O error, dev sdb, sector 76908088 op 0x0:(READ) flags 0x80700 phys_seg 28 prio class 2
[52311.663235] ata2: EH complete
[52311.917439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
[52311.917447] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52311.917449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52311.917452] ata2.00: failed command: READ FPDMA QUEUED
[52311.917454] ata2.00: cmd 60/20:a0:40:5a:87/00:00:cd:01:00/40 tag 20 ncq dma 16384 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52311.917460] ata2.00: status: { DRDY }
[52311.917463] ata2: hard resetting link
[52315.238437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52315.283121] ata2.00: configured for UDMA/33
[52315.283137] sd 1:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52315.283141] sd 1:0:0:0: [sdb] tag#20 Sense Key : Illegal Request [current]
[52315.283143] sd 1:0:0:0: [sdb] tag#20 Add. Sense: Unaligned write command
[52315.283145] sd 1:0:0:0: [sdb] tag#20 CDB: Read(16) 88 00 00 00 00 01 cd 87 5a 40 00 00 00 20 00 00
[52315.283147] I/O error, dev sdb, sector 7743167040 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[52315.283162] ata2: EH complete
[52316.242431] ata2.00: exception Emask 0x50 SAct 0x10 SErr 0x30802 action 0xe frozen
[52316.242437] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52316.242439] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52316.242443] ata2.00: failed command: READ FPDMA QUEUED
[52316.242444] ata2.00: cmd 60/08:20:70:7c:7c/00:00:41:00:00/40 tag 4 ncq dma 4096 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52316.242450] ata2.00: status: { DRDY }
[52316.242453] ata2: hard resetting link
[52319.558438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52319.619535] ata2.00: configured for UDMA/33
[52319.619551] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52319.619554] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current]
[52319.619557] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command
[52319.619560] sd 1:0:0:0: [sdb] tag#4 CDB: Read(16) 88 00 00 00 00 00 41 7c 7c 70 00 00 00 08 00 00
[52319.619562] I/O error, dev sdb, sector 1098677360 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[52319.619581] ata2: EH complete
[52320.916451] ata2.00: exception Emask 0x50 SAct 0x8 SErr 0x30802 action 0xe frozen
[52320.916456] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52320.916459] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52320.916462] ata2.00: failed command: READ FPDMA QUEUED
[52320.916463] ata2.00: cmd 60/20:18:78:6d:f0/00:00:3c:00:00/40 tag 3 ncq dma 16384 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52320.916469] ata2.00: status: { DRDY }
[52320.916472] ata2: hard resetting link
[52324.238433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52324.280862] ata2.00: configured for UDMA/33
[52324.280878] sd 1:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52324.280883] sd 1:0:0:0: [sdb] tag#3 Sense Key : Illegal Request [current]
[52324.280886] sd 1:0:0:0: [sdb] tag#3 Add. Sense: Unaligned write command
[52324.280889] sd 1:0:0:0: [sdb] tag#3 CDB: Read(16) 88 00 00 00 00 00 3c f0 6d 78 00 00 00 20 00 00
[52324.280891] I/O error, dev sdb, sector 1022389624 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[52324.280915] ata2: EH complete
[52324.315439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
[52324.315445] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52324.315446] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52324.315449] ata2.00: failed command: READ FPDMA QUEUED
[52324.315451] ata2.00: cmd 60/08:a0:80:6d:f0/00:00:3c:00:00/40 tag 20 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52324.315457] ata2.00: status: { DRDY }
[52324.315460] ata2: hard resetting link
[52327.606435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52327.667122] ata2.00: configured for UDMA/33
[52327.667141] ata2: EH complete
[52328.442437] ata2.00: exception Emask 0x50 SAct 0x80000 SErr 0x30802 action 0xe frozen
[52328.442443] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52328.442444] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52328.442447] ata2.00: failed command: READ FPDMA QUEUED
[52328.442448] ata2.00: cmd 60/00:98:90:6e:59/01:00:3d:00:00/40 tag 19 ncq dma 131072 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52328.442453] ata2.00: status: { DRDY }
[52328.442456] ata2: hard resetting link
[52331.758435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52331.778679] ata2.00: configured for UDMA/33
[52331.778697] sd 1:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52331.778701] sd 1:0:0:0: [sdb] tag#19 Sense Key : Illegal Request [current]
[52331.778704] sd 1:0:0:0: [sdb] tag#19 Add. Sense: Unaligned write command
[52331.778707] sd 1:0:0:0: [sdb] tag#19 CDB: Read(16) 88 00 00 00 00 00 3d 59 6e 90 00 00 01 00 00 00
[52331.778709] I/O error, dev sdb, sector 1029271184 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52331.778733] ata2: EH complete
[52332.186438] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
[52332.186445] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52332.186447] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52332.186450] ata2.00: failed command: READ FPDMA QUEUED
[52332.186452] ata2.00: cmd 60/90:08:a0:91:1b/00:00:3a:00:00/40 tag 1 ncq dma 73728 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52332.186457] ata2.00: status: { DRDY }
[52332.186461] ata2: hard resetting link
[52335.502433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52335.565114] ata2.00: configured for UDMA/33
[52335.565131] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52335.565135] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current]
[52335.565138] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
[52335.565140] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 3a 1b 91 a0 00 00 00 90 00 00
[52335.565142] I/O error, dev sdb, sector 974885280 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
[52335.565162] ata2: EH complete
[52335.733444] ata2.00: exception Emask 0x50 SAct 0x20 SErr 0x30802 action 0xe frozen
[52335.733450] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52335.733453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52335.733457] ata2.00: failed command: READ FPDMA QUEUED
[52335.733458] ata2.00: cmd 60/08:28:a0:91:1b/00:00:3a:00:00/40 tag 5 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52335.733462] ata2.00: status: { DRDY }
[52335.733465] ata2: hard resetting link
[52339.054437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52339.092930] ata2.00: configured for UDMA/33
[52339.092948] ata2: EH complete
[52339.311447] ata2.00: exception Emask 0x50 SAct 0x40 SErr 0x30802 action 0xe frozen
[52339.311455] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52339.311457] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52339.311461] ata2.00: failed command: READ FPDMA QUEUED
[52339.311462] ata2.00: cmd 60/00:30:00:fa:06/01:00:0b:00:00/40 tag 6 ncq dma 131072 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52339.311469] ata2.00: status: { DRDY }
[52339.311472] ata2: hard resetting link
[52342.630429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52342.636897] ata2.00: configured for UDMA/33
[52342.636913] sd 1:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52342.636917] sd 1:0:0:0: [sdb] tag#6 Sense Key : Illegal Request [current]
[52342.636919] sd 1:0:0:0: [sdb] tag#6 Add. Sense: Unaligned write command
[52342.636922] sd 1:0:0:0: [sdb] tag#6 CDB: Read(16) 88 00 00 00 00 00 0b 06 fa 00 00 00 01 00 00 00
[52342.636924] I/O error, dev sdb, sector 185006592 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52342.636947] ata2: EH complete
[52342.831443] ata2.00: exception Emask 0x50 SAct 0x2000 SErr 0x30802 action 0xe frozen
[52342.831450] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52342.831453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52342.831458] ata2.00: failed command: READ FPDMA QUEUED
[52342.831461] ata2.00: cmd 60/00:68:68:a5:1b/01:00:39:00:00/40 tag 13 ncq dma 131072 in
``It’s a bit long but here it is.
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba X300
Device Model: TOSHIBA HDWE140
Serial Number: 41IUK67JFBRG
LU WWN Device Id: 5 000039 abc58066c
Firmware Version: FP1R
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sat Apr 13 17:09:03 2024 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 481) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 464
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11263
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 11051
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11259
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 8
192 Power-Off_Retract_Count 0x0032 083 083 000 Old_age Always - 8637
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 11332
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 38 (Min/Max 16/59)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 073 073 000 Old_age Always - 11003
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 545
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
