You are viewing a single thread.
View all comments View context
37 points

They probably shaved about the same but mostly used double-edged (100% steel) blades that could easily fit in a slot, rather than the plastic-clad, quadruple-blade nonsense sold for $8/cartridge.

You can still buy double edged razors for about 10-15 cents apiece, by the way.

permalink
report
parent
reply
12 points

Mhm, that’s what I use. Not sure why other people around my age don’t, to be honest. Super cheap and you don’t exactly have loads of cash to spend at 20

permalink
report
parent
reply
10 points
*

Dude I’m 38 and I’m surprised everybody doesn’t at any age.

I shave my head. I’ll admit I had to unlearn some habits from cartridge shaving. First couple of times my head was a bloody (literally) mess. But once I got technique down, it’s easier and faster than cartridge shaving.

What slows me down over “the modern way” is that I whip my soap with a brush and bowl. That’s a little less convenient than shaving cream/gel, but it’s optional. No reason you can’t use canned foam/gel. Holy shit is it cheaper though. I ordered a 3 pack of cheap shaving soap (3.5oz bars, $10 total) last January and I’m not even halfway into the second bar.

Best part is, less waste. No plastic. Every handle I’ve seen is all metal and even the cheap ones feel better in the hand. Stainless Steel Blades are wrapped in wax paper and packed in a little cardboard box. Soap gets shipped in cardboard boxes.

Literally no reason not to.

permalink
report
parent
reply
3 points

You and me both. Last year, I bought enough Feather brand razor blades to last me the next couple of decades. I recall it cost less than $100.

permalink
report
parent
reply
1 point

I tried it. For months and months. But I always ended up with either a bad shave, or a bloodied face. Apparently my skin is to weak for this stuff. So I am back to expensive cartridges.

permalink
report
parent
reply
1 point

I just dry shave (safety razor) and it seems to work well for me. Less hassle + blades don’t rust so they last longer

I also heard that the blades can be sharpened by running it against trousers or something like that, so it is possible to reuse them / extend their lifespan

permalink
report
parent
reply
4 points
*

Yeah used DE since my grandpa gave me one of his when I was like 13, his father was a barber by trade and I also have his straight razor collection (which I don’t use).

Actually use a mix of DE, disposable, and electric, depending on the purpose. The Philips oneblade and classic Andis foil for face and jawline with finishing DE touch on flat areas sometimes. I know electric on face… used to have acne too but I find they keep my skin barrier more intact by barely not getting to the skin.

I legit use the double edge on d+bs more than anything… sounds like a bad idea I know but for me it’s the easiest, quickest, far superior result, and way less injury than any other method. You maybe wouldn’t think this but going on every 3-5 days for like 10 years at this point so I’m completely confident in it. An electric with shortest attachment for pubes and around the edges, then the DE on genitals, nothing better.

permalink
report
parent
reply
12 points

15¢ per double edge blade is high unless you’re only buying 10 or 20 blades at a time. Get the 100 count pack and you’re paying under 7¢ per blade… Each blade should easily last 3-7 shaves depending on your hair, more if you have tough skin ;)

permalink
report
parent
reply
3 points

not only cheaper, but better

permalink
report
parent
reply
2 points

As someone who shaves daily, this is the way to go, its so much better, not just on the wallet.

permalink
report
parent
reply
1 point

I have been using at minimum a 3 bladed safety razor since I was 14. I have a feeling I would obliterate my face if I tried using straight blade.

permalink
report
parent
reply
2 points

First couple of times I had to unlearn some old habits. Was a bit of a mess. But that was mostly in my scalp. My face was largely fine (to be fair, I have a beard, so it’s just cheeks and neck that gets the blade).

After my technique improved, though, I get nicked about as often as I would with a cartridge.

The hardest part was finding a blade that worked well for me. There’s a ton of variation in the blades. Once you find a brand you like though you tend to lock in. I bought a bunch of sample 5-10 blades from the most popular brands (feather, astra, gilette, tiger, etc). I ended up settling on Gilette Silver Blues. Ymmv.

permalink
report
parent
reply
1 point

No the 3 blades get stuck so I went with one and got much better results.

I am back at electric razor but shaved with the 1 blades for years.

permalink
report
parent
reply
1 point

There’s a bit of a learning curve, but just be cautious at first and you’ll figure it out. It’s not rocket science. Also don’t use dull blades as that’s an easy way to cut yourself. Fortunately they’re dirt cheap.

permalink
report
parent
reply
1 point

Nah. It takes a little more awareness while you’re shaving for sure, but you’re rarely if ever going to cut yourself once you get your gear and technique dialed in. For me, I had to find the right blade. I found Feather brand blades, which a lot of people recommend, didn’t work well with my skin, but Astra blades are great for me. Everyone’s a little different.

permalink
report
parent
reply
2 points

I also like the Astra blades. Even more important ive found is a quality razor holder. I had a few, but when I got a Henson for Christmas it was the best shave I’ve ever had. Their marketing isn’t a gimmick. A well supported blade held rigid doesn’t flex and pull at hairs.

permalink
report
parent
reply
1 point

I’m talking about double-edge blades that fit into a handheld razor that looks a lot like a Gilette or Bic, except it’s all metal, and about 2% of the price per blade, not a straight “safety” razor that you might see a professional barber use.

permalink
report
parent
reply

Memes

!memes@lemmy.ml

Create post

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

Community stats

  • 8K

    Monthly active users

  • 13K

    Posts

  • 288K

    Comments