96 points

Only Satan would design a hole that is smaller than the end of a bent paperclip when the entire purpose of the hole is to put something into it.

permalink
report
reply
36 points

How else can you sell an iPoker 4X?

permalink
report
parent
reply
12 points

You’re still using the 4X? Lol, get yourself an 8Max and thank me later.

permalink
report
parent
reply
1 point

I did but I’m still saving up for the handle

permalink
report
parent
reply
17 points
Deleted by creator
permalink
report
parent
reply
3 points

For anyone else who ever has this problem, there are easier ways than a paper clip and hammer.

I have used pencil lead (0.5mm) successfully. You get a short piece and push hard, it might hurt your thumb a bit but it works. Obviously most needles work but I have used things like safety pins from the back of a shirt pin. I’ve also used the tip of mechanical pencils in a pinch. And if you’re crafty you can do something (carefully) with a toothpick and a knife to shave the tip down. Dumbest thing I’ve ever used is a disposable flosser that had a toothpick on the end. I also used that to clean USB C ports. All of these also similarly work on small reset buttons on routers and such.

permalink
report
parent
reply
1 point

I usually take a needle of some kind and clip the point off so it’s not as sharp.

permalink
report
parent
reply
6 points

An earring pokey works too, just wipe off any schmutz

permalink
report
parent
reply
2 points
*

is there a name for the superfine point ones?

permalink
report
parent
reply
1 point

I guess it’s called a SIM card eject pin tool, but you’ll usually find them in cell phone toolkits.

permalink
report
parent
reply
1 point
*

some are thicker or thinner than others. some phones have a superthin hole. so some ejectors or a paperclip won’t work (for some phones).

maybe the superthin variety is the most common variety out there. but i have a collection and they are nearly all thick.

permalink
report
parent
reply
1 point

there must be an everyday item that functions as a makeshift alternative.

permalink
report
parent
reply
1 point

Certain plastic toothpicks work.

permalink
report
parent
reply
-1 points

For a Korean, the hole doesn’t need to be that big

permalink
report
parent
reply
60 points

I just realized that each phone comes with one and only one of SIM ejectors, and I have a lot of those in my drawer. I think I have a problem. -_-

permalink
report
reply
24 points

You’re responsible for everything!!!

permalink
report
parent
reply
17 points

Most screw-driver kits like the IFixIt kits, include a sim-eject head.

permalink
report
parent
reply
5 points

Me too… and my phone uses an eSIM!

permalink
report
parent
reply
3 points

The chosen one!

permalink
report
parent
reply
39 points

I keep one on my keys since it’s useful for pushing reset buttons and things and if I really need to it even works as a screwdriver

permalink
report
reply
19 points

Someone told me this a few years ago. Absolute pro life tip!

permalink
report
parent
reply
5 points

Does it ever poke you?

permalink
report
parent
reply
12 points

I kept mine on my keychain for the longest time until it got me right under one of my finger nails. The amount of times I’ve had to use it does not justify that trauma.

permalink
report
parent
reply
6 points

I tried doing it at one point, yes, frequently

permalink
report
parent
reply
3 points

Interesting, it never does for me. Maybe I’m just lucky or my sim tool is a slightly better shape

permalink
report
parent
reply
20 points

I have a lifehack for this:

permalink
report
reply
7 points
Deleted by creator
permalink
report
parent
reply
4 points

Got it a 7 years ago, haven’t lost the ejector since… Even amazes myself everytime I need it and it’s still there… 😅 Before this mine usually didn’t last a week.

permalink
report
parent
reply
2 points
Deleted by creator
permalink
report
parent
reply
6 points

That wallet has seen some serious shit.

permalink
report
parent
reply
3 points

Yeah, I urgently need a new one but I keep postponing and forgetting. 😅 It used to be a cheap fake leather one which looked cool, has a crocodile head on the outside in it, and just plainly looked cool. Now, 5 years later, all the leather, except for the crocodile head, has proven to be a thin layer that has come off over time and what remains is a completely exposed (again, except for the crocodile head) black rubbery underlayer. 😅 Oh, well, it cost me €5 or something, I guess 5 years was a good service at that price…

permalink
report
parent
reply
18 points

I noticed my phone battery bulging just yesterday. So I went and dug up the documentation that came with it to see if I could take advantage of the manufacturer’s warranty. No dice, but the sim card tray ejector thing was in with the user’s manual. So at least I have that. :/

permalink
report
reply
17 points

Check out ifixit.com - your phone might be pretty repairable. It’s crazy that companies stopped making phones with replaceable batteries.

permalink
report
parent
reply
8 points
*

Not that much. . . . .

. . .

. . Money is why

permalink
report
parent
reply
3 points
*

Yeah, I’ve done some research about fixing it myself on YouTube. A kit to fix it is only about $25. But I was a little intimidated by the “heat the phone to soften the adhesive so the screen will come off” step and decided to look into how much it’d cost just to get it fixed professionally.

I walked into the “Authorized Google Repair” shop with my bulging Pixel and the guy told me there was a “99.9% chance” that the screen would break in the process of replacing the battery and if he had to replace the screen too, the total cost would be more than I paid for the phone and more than I would pay to get an identical model on Amazon now.

So, I’m evaluating my options. I could get a replacement battery and a replacement screen and do a lot of research and fix it myself, which is a little risky. Or I could just contribute to the e-waste problem and get a new phone (or a refurb; this whole ordeal makes me want to not spend much on phones in the future) that has a consumer-replaceable battery.

Oh, also, I’ve had this phone for less than three years.

Also, an unlocked bootloader and a mature LineageOS or GrapheneOS or whatever other Open-Source no-Google-apps distribution is basically an absolute deal breaker must have for me. (I suppose if I do end up getting a different phone, I could look into Linux phones too, but I’m a little wary of that. I got burned with the Openmoko Neo Freerunner back in the day.) I bought this Pixel direct from the manufacturer (not through a carrier or anything) because that was the only way to get it with an unlocked bootloader so I could go LineageOS. But going that route, I only get the one-year manufacturer’s warranty. No carrier warranty or anything.

So I guess I’ll go go pray to Saint Louis Rossmann now and hope for divine inspiration. Lol.

(Ha! Sorry for the rant. I was an extremely late adopter of smartphones at all because I don’t trust them. This is the first smartphone I’ve ever had and it didn’t last me three years! Clearly I should have remained staunchly Amish for QWERTY. Lol.)

permalink
report
parent
reply
3 points
*

That guy is bullshitting you: I used to work in a repair shop and screens breaking on any device is uncommon, but even if the screen does break, it’s cheaper to replace it yourself than it would be to pay them.

I suppose it’s possible he wasn’t lying, but that would mean that he’s really shitty at his job and breaks 99%+ phones he works on.

permalink
report
parent
reply
3 points

I used to work in a phone repair shop, I have no clue what that guy is talking about. Ive replaced the battery on dozens of pixels and never had the screen break on me. He most likely said that because there is always some risk of something breaking during the repair, so by stating it up front he won’t get any angry customers after the fact.

permalink
report
parent
reply
-3 points
*
Removed by mod
permalink
report
parent
reply
1 point

You can replace phone batteries. It’s not that hard. It’s just harder than sliding it in.

It costs $15 plus the battery cost to have a professional with warranty to do it for you.

permalink
report
parent
reply
0 points
*

Depends somewhat on the phone on how easy it is to do, but if you’re technically inclined, depending on what the shop charges, it might be worth doing yourself (especially if you have a decent heat gun that can be set reliably to lower temperatures and know how to repair tech already). $15 is worth it IMO, even if you are good with tech, but some places might charge more.

permalink
report
parent
reply

Memes

!memes@lemmy.ml

Create post

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

Community stats

  • 8K

    Monthly active users

  • 13K

    Posts

  • 288K

    Comments