Hi all, just getting into home labbing the past few months. I have a small cluster of Proxmox machines running many of the usual services.
Currently running a 350x10 Spectrum cable internet connection. This is working just fine and has been shockingly stable for five years. It also keeps a very sticky public IPv4 address that has been perfect for self hosting and a cloudflare tunnel. It’s a modem only that goes into an OPNsense VM.
Upload is obviously a bottleneck that has become frustrating. AT&T Fiber came through the neighborhood a few months ago and are offering a 300x300 FTTH with no installation, fees, caps, contracts etc for less than the Spectrum connection. I’d love to jump on it but have read in a few places that they sometimes use CGNAT, the gateways don’t behave well in passthrough mode, mess with traffic, block ports, etc.
I guess the question is then, what are people’s experience with ATT fiber and homelabbing? Is there anyone who won’t lie about it that I could call before install? In SC if it matters. Thanks!
I switched to ATT Fiber around a year ago (from Spectrum) and I’ve had no issues thus far. Their provided gateway doesn’t properly bridge though, creating a double NAT situation. I worked around this by getting my own ONT and then writing the data from the old gateway to it (S/N, ONT ID, etc.). As for CGNAT, my network has a public facing IP, not a CGNAT’d one.
If you’re curious about using your own ONT, here’s the guide I used (I believe you’ll need a BGW320 originally to use this): https://docs.google.com/document/d/13gucfDOf8X9ptkj5BOg12V0xcqqDZDnvROJpW5CIpJ4/view
Look into a business account with ATT, which gives the added benefit of a fixed IP.
I’ve had AT&T Fiber in two different cities 360 miles apart and neither location had CGNAT. The AT&T Gateway isn’t the greatest, but it can hand off the WAN IP to your own router, but you’re still confined to the AT&T Gateway’s tiny NAT table. The extra upload speed is no joke. I also Work from home and I can upload files to the company Google Drive faster than I can when I visit an office. You can ask AT&T for static IPs still I believe, but at my last place the Dynamic IP didn’t change in 4 years.
The service has been quite reliable. I have had one 2 hour outage after a windstorm in six months. I live in an older neighborhood where telecom and electric are all above ground in the alley.
It’s always a good idea to jump on free installation for fiber. It adds value to your home. It also gives you bargaining power when ATT raises the rates. You can call Spectrum and play ATT against each other.
As others mentioned in comments ONT connection is what you want.
Old article, but still relevant for ONT explanation: https://www.groundedreason.com/use-router-fios-internet/
In Alabama. Don’t have CGNAT. The gateway does ip Passthrough fine, the newer BGW320 505 anyway. If you do ip Passthrough to your own router there won’t be any ports that will be blocked.
While rare, sometimes att will remotely update it and you may need to reconfigure ip Passthrough again. If you choose not to use ip Passthrough, port forwarding works fine it’s just awkwardly implemented.
I thought I would hate att but the service has been way more stellar than I thought. However the customer service is god awful, too many policies road block quality service.
In my setup I often get more bandwidth than I pay for. So much so I downgraded to 300/300 and usually see 400ish+ sometimes.
