Due to unfortunate circumstances (me dropping the laptop) I have now ended up with a half broken laptop that has a broken screen and a dying battery. I could repair it, however, I don’t wanna bother as I’m very likely gonna be getting a new one soon.
The laptop itself still works fine, however the broken screen and dying battery make it pretty much useless as a laptop and I already have a home lab NAS thing, so I’m kinda out of ideas on what to do with it. Any ideas?
Here are the specs:
CPU: i5-8300h
GPU: intel HD830/GTX1050ti
RAM: 16GB
Storage: 128GB SSD
Remove the battery, take the motherboard out of the case. Plug the motherboard in, and voila you have a larger and more powerful raspberry pi. You could use it as a second node for control, management, observation purposes, etc.
Great suggestion, but I’m not entirely sure it’s 100% possible on all models? Some models are built so that it won’t turn on without a battery installed (much like phones) and that the power has to pass through the battery before it reaches the motherboard.
I believe that scenario would take much more knowledge of electricity plus some soldering skills to bypass the battery. They gave specs, but not make and model. I don’t trust companies like HP to not take the route that requires you to send it in to them for servicing.
It does work without the battery and the model is: dell G3 3579, I just didn’t think the model was that important to mention.
If you remove the battery it will either A not work or B run extremely slowly. Always have a functional battery in your laptops.
Ideally find a way to limit the charge of the battery. But if you can’t nuking your battery is better than running at 800mhz or whatever your lowest clock speed is.
I’ve run laptops before without batteries a few times and never had issues, is there a reason for the slowdown?
Power consumption. Especially with turbo boost power consumption can easily spike well above what the power brick can deliver, so the battery is used like a capacitor. Or shit even without the spikes chargers can’t keep up. My laptop will actually discharge under full load with the full 240 watt charger.
It’s not normally an issue on REALLY low end devices (sub core i, like pentiums or atoms), but anything high end will reduce it’s power consumption without a batter installed.
Because over time the battery degrades, swells, and becomes a fire risk.
Keeping it only 80% charged can help mitigate it but not fully.
That is largely a myth and in my experience never happens with higher quality laptop batteries. But yes limiting charge doesn’t hurt if it is only used as a UPS anyways.
Retroarch box for your TV?
Services: DNS (Pi-Hole for example), DHCP, or NTP, off the top of my head.
Web server for a Smart Mirror?
I run my mirror locally, but you can also pull it from a separate server.
Sounds like you’re looking for a solution you already know the answer to; recycle the laptop if you’re not going to repair it.
It would bug me a ton if I were to recycle it, as it still technically works, it’s just not worth repairing, as the total cost pretty much equals getting the same one, but working, 2nd hand…
Take it to an electronics recycling center. Seriously.
If you already have a homelab, you plan to replace it, you don’t want to repair it, and you don’t have an obvious use case for another machine (it’s just another computer; you either have the need for another computer or you don’t), then holding onto it is just hoarding.