I had a good run but ever since getting to the fire temple it’s crashing every 5 minutes
Are you using cryoutilities?
The fire temple ran like ass for me also, but it was playable. Check out this guide, it may contain settings you didn’t already tweaked yourself: https://lemmy.fmhy.ml/post/112584
I just got the latest version of yuzu on emudeck last night and it seems to work fine but I only played for 10 mins. Have you installed the latest version of yuzu or ryujinx?
I’ve been playing on my Windows PC and Steam Deck (syncthing ftw) and so far so good, but I haven’t gotten to that part yet. I’ll try to remember to report back when I do.
Is it worth trying to play this on the deck yet? I’ve been dragging my feet because I don’t really care much about making it run and better than it does on the switch; I just find the switch itself in handheld mode stupid uncomfortable and would mainly want to be able to play on the deck instead of switching between devices
If you don’t care about making it run better than on the Switch, you’re good. I did a little bit of hoop-jumping, following a guide that was on Reddit (and I don’t know if it’s currently visible) to get it running really well and also synchronize saves and mods to my PC.
I have not played TOTK on the Switch at all, I’ve exclusively experienced the game as a PC/Deck game and it’s a damn good one. Sometimes I think “oh this must be an emulation problem” when the game dips to 40FPS (PC) or 20FPS (Deck) while fiddling with the Ultra-Hand, but then I see my roommate do the same thing on an actual real Switch and it lags even more.
Do you have any recollection of the guide you used? I’d be curious to look around for it just in case it’s not stuck inside the reddit void. So far I’ve had luck limiting the fps to 30 and setting the gpu clock to 1200 (granted, I am only in the first sky island area and haven’t been anywhere near lava yet)
It was from /r/newyuzupiracy which actually got banned, it wasn’t a blackout / protest thing. Unfortunately I don’t have it cached but I can check my yuzu settings later for you.
EDIT: I found the one I used rehosted here. If you’d rather not click a link to Reddit, I’ll put the post under a spoiler here but I’m not going to go through and correct any broken formatting (or remove Reddit links):
u/Maxlastbreath's TOTK yuzu guide
Last Updated: 18th June 2023 - 19:58 UTC - THE CHANGELOG
YouTube - Kofi - Github
Recommended Version(s) EA3589, EA3652.
If you are experiencing weird bugs check out the Bug Megathread TBA before commenting, there’s also FAQ/Q&A at the bottom of the guide, including some common bugs.
This is the most up to date guide to get YUZU working with the latest available patches/mods & fixes. This guide will be updated daily (or weekly). if you are facing any problems you can check my other post Bug Megathread which is also up to date with this guide :). Feel free to ask anything, I’ve already answered close to 4000+ comments and counting on the original posts, that have been removed from reddit! :) If you are having trouble following the text, there’s also a step by step Video Guide.
The Long Awaited Video Guide is here!
Wondering if you should upgrade to EA3602+ check this Performance Review.
The Guide:
Download these files:
- Latest available Early Access Yuzu Build from Pineapple Github (Recommended) or Main Official Yuzu Site
- ToTK rom - Both XCI & NSP work with Yuzu
- ToTK Updates: Any Update will work.
- 16.0.3 Title & Prod Keys: Dump your own keys.
- MOD FOLDER V4.1! (FULL 1.0 SUPPORT, fixed a weird but with 1.1.0 - lightning) - Extra Info
Mod Folder Log up in my profile now, includes all versions.
Setup Guide:
- Unzip/Install Yuzu and open the yuzu folder and create a folder named user (case sensitive).
- Inside your
userfolder, unzip/extract the contents of the Title & Prod Keys archive as well as the Mod Folder. (Your user folder should now contain aloadfolder andkeysfolder) - Setup your game directory (where you have your ToTK rom) and make sure Yuzu recognizes the game
- In Yuzu select ToTK, go to Files in the top left corner - Install to NAND and select your 1.1 update file
- In Yuzu select ToTK -> Properties -> Enable all mods and 1.1 update
Still can’t setup yuzu? Follow through with Video Guide.
Settings:
General Settings:
- Multicore CPU Emulation ✓
Graphic Settings:
- Accelerate ASTC Texture Decoding ✓ - Recommended on for most GPUs.
- API: Vulkan Use Disk pipeline ✓
- Use Asynchrous GPU emulation ✓
- Resolution (1x, 2x, 3x Based on GPU) - 0.75 steamdeck
- Windows Adapting Filter (AMD FSR, Nearest, Bilinear)
- Anti Aliasing Method (SMAA) Sharpness 0
Advanced Graphic Settings:
- (NEW) ATSC recompression ✓ BC3 (6- 8gb vram) BC1 (4gb vram or under) BC1 (Steamdeck)
- Decode ATSC Textures Asynchronosly(HACK) X <-- DISABLE: GAMEBREAKING
- Enable Asynchronos Presentation ✓ <-- Could cause stuttering (updated)
- Force Maximum Clocks (Vulcan only) ✓ (Only if GPU is RTX 3070 or higher)
- Enable Reactive Flushing ✓ <-- ON (Turning it off, breaks the game)
- Use Asynchronos Shader builder (HACK) X <-- Reduces shader stutter but breaks Icons
- Use Fast GPU Time (HACK) ✓ <-- Some people reporting crashing.
- Use Vulkan Pipeline ✓
- Accuracy LEVEL (Normal) - Weirdness with physics use HIGH
- Antistrophic Filtering (16x) - Free Visual bump
Every Setting Explained in a Video Format and It’s Impact on performance or the game.
Steamdeck should run quite a lot better on EA3606+ with the above settings :).
System Information:
- Please ensure that your GPU drivers are up-to-date
- Please note that only very high-end PCs can achieve stable 60FPS
- If you have less than 32GB of RAM, consider increasing your Page File size to 32GB
Minimum Specs:
- 16GB RAM (32GB recommended)
- Installed on SSD
- 4GB+ VRAM (8GB+ for 2x Render Res.)
Extra Notes:
- Requirements for yuzu to work properly - Install C++ Libraries
- FPS Lock (Dynamic FPS Mod) - For 30 FPS = Limit Yuzu Config speed to 50%, for 45FPS = 75%
- HDR for Windows 11 - Rename Yuzu.exe to Cemu.exe to benefit from your HDR TV/Monitor, works very well. (WINDOWS 11 ONLY)
Extra Sources:
TOTK Mod Collection Holographic Wings
Interpolated 60 fps Cutscenes V2 - Gone for now
Mods guide
- Right click on TOTK, Open Mod Data Location put any mod you want here.
Questions & Answers:
- Q: Stuck in BLACK SCREEN after trying to LOAD the game
- COMMON solved ISSUE, IRC fitgirl repack ROM is buggy with 1.1 UPDATE
- please remove update and install it again left click on totk, remove>remove update
- if you have RTX 2000 or under download NVIDIA drivers 472.12 Newest Drivers.
- If none of those worked for you, get a different rom or stick to 1.0 update.
- Q: Will this work on Steamdeck/Linux?
- Yes, make sure you download an appimage the rest is the same
- Q: Do I need Vulkan Shaders?
- It’s not adviseable to use other people’s shaders, because it could cause unexplained issues. That being said using only the vulkan.bin will build your own shaders, also keep in mind sharing shaders is considered Piracy.
- Steamdeck users can still use other Steamdeck users shaders.
- Q: I want to install a new Version of yuzu how do I?
- Download the new yuzu version from Early Access Yuzu Version and copy the User folder in the new directory, it contains all your saves mods and shaders.
- OP, I can’t get stable 60 FPS what do i do, my RTX4090, rx7800x3D is not enough!?
- Switch emulation is VERY complex and the fact this is running 2 DAYS after TOTK release is a miracle by itself. (tho that config shoud be able to get you pretty close), if you are having a lot of stutters delete your shader cache.
- Here’s a comparison between Cemu and Yuzu, you can decide if it Yuzu will work for you.
Version Log
Please check the Bug Megathread for any issues you may be having.
- CREDITS:
u/ChucksFeedAndSeed - Shadow, resolution, Dynamic FPS mod
u/PixelKiri - Cutscene mod
Randomguy FPS Mod - 60 FPS Mod credit
u/MarethyuX - Blackscreen when switching weapons mod fix
theboy181 - Credit for cutscene fix
u/StevenssND - Auto Save Backup
Thank you u/Zel_La - BIG HELP WITH FORMATTING! <3
If you want to support my work, I have a kofi link at https://ko-fi.com/maxlastbreath
