Dion Starfire
A partner of mine has an above-range microwave with the worst implementation of this that I’ve ever seen. When you mute the button beeps, it mutes the entire microwave. Food finished cooking? Silent. Manual timer set? Hope you’re looking to see when it hits zero. There’s no way to silence the buttons without muting all alerts completely.
It was an old school revolver where you have to manually cock back a spring loaded hammer. If you pull it back part way and then gently guide it back to normal position, the firing pin will just rest against the primer (the part of the round that sets off the gunpowder) and nothing will happen. If you pull it all the way back, the hammer locks in place until you pull the trigger, at which point the locking mechanism is unlocked and the hammer is freed to slam the pin into the primer, firing the round. The problem comes if you pull it most of the way back and then lose your grip. In that case, the hammer slams into the round just like if you fired it. Because of the physics involved with pulling back the hammer against a heavy spring (ironically a safety against kids pulling it back), the end of the gun usually gets levered upwards during the act of cocking. So, even if you started pointed directly at the ground, you often won’t be by the time the hammer locks in place. It’s your job as a gun owner to make sure that nothing you don’t mind shooting is in front of the gun at any point during that arc.
Add to this that it was a blank round, meaning there was just gunpowder but no bullet. Usually in a round, the gunpowder is trapped between a big slug of lead (the bullet) and the primer. In a blank, a thin layer of paper and glue is used in place of the bullet to keep the powder from falling out. A lot of people think blanks are 100% safe because there’s no bullet, but at very close range that tiny bit of glue still gets shot out with enough force to penetrate skin.
Thus, the guy is still an idiot for pointing the gun in an unsafe direction while cocking it, even if it’s a blank, but it’s easy to see how a 62yo could lose his grip on the hammer and have the gun go off accidentally in a direction he didn’t intend. And because it was a blank, he likely wasn’t following full gun discipline like he should have been. This doesn’t excuse his behavior (gun owners are literally taught to treat every weapon as loaded and deadly), but it might explain both his behavior and why the article chose the passive “it slipped and it shot” voice. Because basically, he was getting it ready to use as intended and it did magically “go off”, and it also is quite possible that it wasn’t pointed at the kid when grandpa started the task.
I was thinking something similar. I use Arch because it’s easy and user friendly for me. I also come from a history of using Slackware in the mid-90s, to Gentoo in the mid-00s, to Arch in the mid-teens. So whenever anyone asks how I got to where I am with Linux, I generally recommend that they don’t follow the same path of pain, and start on something that’s actually user-friendly like Mint or Ubuntu.
It’s more than just voter turnout. The deck is stacked. Like many red states, most of the blue voters in Texas are gerrymandered into a small handful of districts. See https://en.m.wikipedia.org/wiki/Texas’s_35th_congressional_district for an example.
Simple solution is “resistant damage” - damage taken by burning your life force to power spells can only be healed by natural healing, not magical healing. It’s tracked separately, and similar to subdual damage, you add it together with normal damage to determine if the character reaches 0HP. If you choose to go this route, I suggest that HP not be your primary fuel for spellcasting, but rather have the patron grant a class feature that allows “overcasting” by burning one’s life force to power additional spells after you’ve run out of normal spell slots.
This is clearly humor, but for anyone wondering what the actual connection is, it’s that Mark Shuttleworth, the billionaire founder and CEO of Canonical (the company that maintains Ubuntu), is from South Africa. He liked the word, and decided to name his new Debian fork after it.