I’m on the market to buy a new laptop, and Lemmy has successfully coaxed and goaded me to give Linux a serious try.
I’ve never used *nix as my personal OS.
Which hardware/laptop do you recommend? And which OS to pair it with for a Linux newbie?
I’m a software engineer, and quit my job to pursue an MSc in AI. So my uses will be:
- programming
- study
- browsing lemmy
- gaming
Framework, System76, Slimbook and Tuxedo are great choices
Another happy framework user. I have the AMD 13. The modularity allowed me to completely disassemble and clean/save the machine when my wife spilled an entire chai latte on a 1 week old computer. Fan can get a little loud, but the machine just works great and there’s a great community around it.
I was so close to buying a Framework and put Linux on it, but unfortunately my job requires me to use macOS, so I got a MacBook. I read a lot about the noise caused by the single fan, but the I’d say it’s worth it for the modular ports.
The MacBook’s are damn good though, so it’s not the end of the world for you.
Plus with Asahi they are pretty close to being a decent Linux machine too.
Linux runs on literally anything. The hardware doesn’t matter too much these days, but which distro you pick does. I would say to just load a flash drive with a live image of a distro you think looks cool and see how you like it on a trial basis. Try a couple of them before you reqlly make a decision and then load the full image
The hardware doesn’t matter too much these days
WiFi, Bluetooth and Nvidia graphics have entered the chat
The proprietary Nvidia graphics drivers works pretty well in most distros. Just go to your distro’s driver manager and enable the proprietary driver.
Nvidia cards can still be tricky, especially on optimus laptops. It’s not nearly as problematic as it used to be, but I still run into occasional issues with it. If I ever buy a new computer for gaming, I’m going to go with AMD.
All distris that have GNOME look the same. Same for KDE. I wouldn’t go the looks cool route
Distro choice doesn’t matter too much. Even ubuntu if you ignore snaps
I have a very similar use case so here is my opinion.
HARDWARE
-No dGPU unless this is your PRIMARY gaming computer. (Reason: better battery life, lighter laptop, with recent AMD iGPU you have decent performance for non-VR/not massive openworld AAA games.)
-recent AMD CPU. (Reason: better performance to watt ratio than Intel which makes a big difference for most of your use cases. Better multi-core performance which makes compiling code much faster. Massively better iGPU for light-medium duty gaming.)
-atleast 16GB ram if not expandable but as much as you can reasonably budget.
-16:10 or taller aspect ratio screen (16:9 sucks on laptop size devices, the extra height makes a big difference for school, coding, browsing, pretty much everything but watching 16:9 movies)
-Resolution: personal preference. IMO 1080p or 1920*1200 for 16:10 is ideal for 14" and below laptops. Lower resolution means better battery and on a small screen the PPI is high enough. If you are OK with a trade off of battery life and want a super crisp display then 2K is the highest I would go. 4K is retarded on laptop sized screens unless you are plugged in 90% of the time and you’ll have to fuck with scaling then.
-metal body for stiffness and durability
-decent key travel (usually longer travel means better IME)
If you want to do machine learning/AI work professionally I use and recommend investing in a dedicated desktop with a large memory nvidia (cuda cores) GPU and installing the cuda drivers. Trying to cram commercially viable ai hardware into a laptop is a losing battle and you’ll end up with a worse experience for both use cases, wont be able to fit large models in the memory anyways, and end up buying a desktop for AI while being stuck with a laptop that is worse for laptop use)
SOFTWARE
#1 Nobara OS KDE - best OOB experience for gaming IMO. Easy transition from windows. Has kernel fixes and many laptop specific fixes (asusctrl for example) by default which means you have a good chance of extra features like LEDs, fingerprint, etc working without tinkering). Fedora based.
#2 Linux Mint Debian Edition (LMDE6) - best non-gaming distro to learn and grow into IMO. Access to deb packages. Stable. (nobara has been stable for me as well, but it is LMDE’s bread and butter). Ease of transition from windows. Can game just as well if you are capable of following simple instructions to configure the stuff done by default on nobara and pop (may need to manually change kernels, drivers, etc to get the best performance on new hardware)
#3 Pop_OS - used it for years, but I prefer Nobara after comparing. Ubuntu based so you have access deb packages without ubuntu’s bullshit. Setup out of the box for gaming. I got fed up with failed updates, broken packages, and sluggishness so I swapped to nobara which has been a treat.
EDIT: you can snag some good deals on amazon warehouse deals (used-like new) laptops. These are usually just open box returns and if there is anything wrong you have 30 days to return it.
I recently upgraded to an Asus vivobook S 14x OLED (M5402R) for $780 CAD ($580USD) with a ryzen 7 6800H, 16GB DDR5, a 1TB gen 4 nvme, and it has zero signs of use, slight coil whine under load that I can only hear if I put my ear next to the keyboard and don’t have any sound or music on (I suspect this was the reason for the return on mine since its a common complaint for this model. That’s what I was hoping for since I’m not that picky and its worth the steep discount IMO.) Everything works oob on Nobara. I believe lenovo also regularly heavily discounts their previous gen thinkpads which are a great option, although the AMD configs are rare. Good luck!
I can only argue with metal body here: that’d vary on model-to-model basis. I’ve had a few thinkpads made of plastic, and they’re fine after a few drops here and there, and hinges are alive and well, also I’ve seen some (mostly new-ish) laptops made of literal aluminum foil that are bent AF; what’s even worse, one wasn’t even what they call unibody, i.e. the frame was sandwiched of aluminum shell and a piece of crappy plastic with heat inserts for screws → after like a year of normal usage those inserts literally broke off with the surrounding plastic.
The latter one was some ultrabook by HP. Namedropping here 'cause I have some personal issues with their products, so, frankly speaking, fuck them in particular :)
I just received a 2010 MacBook pro, but don’t like macos and the 2010 can’t support modern Mac. So, Linux. I installed budgie completely forgetting it was snap. I was planning to install LMDE. I’ve never heard Nobara OS, so will give it a shot first. Thanks!
I just want a modern AMD apu laptop with coreboot, slotted ram and multiple nvme slots, but like everything these days it would seem I’m asking for too much.
my current dell one has an amd cpu, slotted ram (no soldered on crap) and nvme + sata (with space for a drive); too bad the build quality and the touchpad sucks
my old lenovo one also had replacable slotted cpus (with Pentium 2020m pre-installed). The lid also just slid off (like on a rail), with only one screw needing removal, no flimsy plastic clips. I broke plastic part of the hinge on that one by just flipping it over, oh well.
My modded t440p goes with me everywhere until then. I have that IIRC core2 dell(?) armored laptop running fully blobless too but it’s just a server backing up my 2fa emergency keys and such things. It was a fun little side project building and flashing coreboot but the hardware is a bit dated these days. The t440p is good for anything other than gaming or 4k movies at least.
I bought a lenovo p14s AMD 2 years ago without OS, 32GB RAM and M.2 SSD, very happy with Arch, BTW. Coreboot would be nice, but it doesn’t seem feasible yet…
I’ve heard great things about system76, never had one of their laptops myself but still have the desktop I got in 2011 (Wild Dog Pro). I personally use the frame.work 13, and it has been working great with Arch installed. I do not recommend Arch, use something like PopOS, or LinuxMint.
I have been eyeing a framework laptop. Just curious how you use the modular ports in your case: do you have different ones you swap sometimes?
2 type c’s and 2 type A USB are in it 99% of the time. I have the HDMI, and display port modules but have rarely used them. I also keep the 2.5Gb Ethernet for when I break the WiFi to get back into the router, and a microsd for when I reflash my raspberry pi’s .
Is there any advantage to having extra ports over a dongle with all of those at once?
I have a “typical” set of ports (2x USB-C, HDMI, USB-A) that’s on my laptop most of the time. I also have the 2.5GbE adapter that I use occasionally.
I assume for charging you have to have the USB C one, and have it on a specific slot?
I keep a copy of Windows installed on a storage card, saves from having to mess about with partitioning for dual booting.
I was typing up a reply and realized this said most of what I was saying. The only thing I’d add is that support matters, popularity matters. Supported or popular HW platforms are less likely to have small random niggles than an off the shelf dell laptop. System 76 or tuxedo lines are ideal supported platforms. Think pads area super popular.
PopOS or Mint are as easy to use as ubuntu, but without being chained to snaps, which everyone is moving towards flatpaks except canonical
Intel 11th gen. I was in the first few batches when it came out and haven’t had a need to upgrade, but love that I can if needed.
Oh man that’s the same as me! I’ve been having all sorts of issues with reliability with mine so I was curious if it was different generations. I guess I’m unlucky?
