I bought an āanalogā washing machine (I canāt believe I just wrote that) because of simplicity. The more complicated something is, the more difficult it is to repair, and the more potential points of failure there are.
Buy a used older model if you need a machine. Because itās cheaper, because it is more basic in its components, because those parts are probably cheaper to buy and replace yourself if need be, and mainly because someone is selling it at its age because it STILL works. Anything tied to a circuit board with a processor is a time bomb.
You will not get a washing machine without processor, let alone PCB. Processors also hardly ever fail. It is stuff like the voltage conversion which powers the logic side, the actual power switches for the motor, capacitors or simply stuff that corrodes.
Does an old school washer dryer that runs off timer relays / knobs / push buttons really have a CPU? I ask because thatās how mine is and I havenāt had to look at the controls but they seem dead simple to me. I get thereās different cycles but some simple ladder logic should be able to handle that, no? Half the world runs on simple machines like that.
Mine has analog dials. I consulted several ābuy it for lifeā communities before I purchased. Anything to cut down on unnecessary complications.
A newer machine however is a lot more efficient when looking at your energy and water bill.
Switching from an older to a newer machine made quite a difference on my monthly bills.
Having a newer machine cost me slightly less money on utilities, and considerably more in washing machine parts.
Yeah but washing machines either use a really simple micro controller or a whole load of really complex voltage based logic and control board electronics that even the guy who designed it couldnāt fix without a lot of writing notes and doing maths.
Thereās more to go wrong on an old washing machine and each control board was unique to the machine so tracking down a replacement is hard - a nice simple raspberry pi Pico you can flash over WiFi would make it so easy to switch out one heater for another without too much thought about impedance or upgrade the turbidity sensor without desoldering resistors.
Plus it gives you infinite control over the program cycles allowing you to update up the best wash method for your detergent and lifestyle.
Of course you can only do that with an open source one. I think itās coming, year of the open source desktop kitchen work surface coming soon.
Thereās more to go wrong on an old washing machine and each control board was unique to the machine
What? Old washing machines just use switches and a cam thatās on a timer. Anyone who can read a basic schematic can figure out what is wrong with one.
Thatās not really true though, the electronics is pretty complex and requires significant work to use different components - Iām sitting next to a pile of dissembled washing machines so i could talk you through a few of the complexities involved in reworking those if you like
I want a Speed Queen. Theyāre way more expensive than your standard machines, but thereās a reason you find them in laundromats everywhere. Theyāre built to be abused.
What do people even do with their wifi appliances? Throw the load in and say Alexa start the washer? How is that easier than setting it yourself?
What do people even do with their wifi appliances?
Timing, automatic and stuff. To keep the washing machine example: you want the laundry out of the machine as soon as possible go hang it up as fresh as possible. Youāre having a long day ahead of you, not a long time between coming home and going to bed, not enough for a full laundry run at least. You load up your machine before leaving home and remote start it the adequate time so itās done shortly after youāre back home.
At least thatās what Iād use such features for.
Other people listen to Spotify over their fridge.
But regular washing machines have programmable start times. I have a cheap Beko and can set it to start up to 19 hours in advance.
Main thing is I get a notification on my phone when itās done. Iām not always near my washer. Sometimes I forget. The times vary a lot by load size so a timer itās as good. Saves me time and keeps my clothes from getting moldy
Triggering home automation too. Like ventilating the laundry when itās washing/drying and for half an hour after.
I cannot help but imagine people in a few decades to be completely detached from basic physics in the house and unable to plan for even the smallest things, without having their appliances help them. Then, when somethings not working, they just break down and cry, because they have no concept of how to do basic stuff anymore.
I donāt connect mine .
But I wanted a washer dryer that had a heat pump drying system.
The one I got on sale also had an auto dosing tray for detergent and softener.
Genuinely very pleased with all the features my āsmart applianceā has.
It uses less power, less water, less detergent. And it weighs and uses humidistats to not over dry my clothes.
The dumb ones that just work on set timers are less efficient than one measuring the load to decide how much water to use and when itās dry.
I suppose I used to eyeball detergent but now a 40 wash bottle lasts me 50 washes.
Long warranty on it I hope Iāll never have to test. But itās there.
To get that I ended up with a WiFi enabled machine and just never put it on a network and turned its own broadcast off.
I occasionally set a time on it. But genuinely throw in the clothes, push 2 buttons, and walk away.
Any appliance that can now be a heat pump instead of an element, or actually measures things instead of using timers is a genuine improvement. Even if itās fairly rudimentary still.
Not everything is worse if itās more complicated.
I ended up the same way. The heat pump washer/dryer combo I got happens to have wifi. I genuinely enjoy this machine even though I donāt think Iām capable of fixing it outside of buying a whole new āheat pump unitā and installing it. It works well and itās way more efficient than the old electric unit that was here when we moved in.
I have a wifi washer and dryer.
The biggest advantage is that it sends you a ping when itās done, and can send you a message about the need for routing maintenance, like changing filters or refilling the detergent container.
Settings wise, itās slightly easier to set from the app, since a telephone has better UX than a washing machine. Mostly I just leave it at āyou figure it outā so itās moot.
You canāt actually start it remotely unless you press a button on the machine first, just send settings to it to activate by pressing start.
How is the phon UX better than the machine UX? The machines i know just have a knob dial for the program and a button each for stuff like temperature, spin, pre-program and start timer. It doesnāt get simpler than that imo.
Itās got a few more options for different settings than my previous washer did, as well as a steam setting thatās only available with certain programs.
It also has a couple of toggles for things like āextra rinseā and āwash fasterā.
Having four knobs and three toggles, two of which are context dependent on one or more knob settings would be confusing, so it uses a screen with a knob and a couple of buttons.
Itās perfectly possible to use standing at the machine, but I also noticed that the last time I needed to change a setting I did so on my phone is all.
Settings wise, itās slightly easier to set from the app, since a telephone has better UX than a washing machine.
*turns dial to 30, presses start*
Right, UX, yeah yeah
I have more settings than a timer, so if I want to do more than just press the start button, which is what I usually do, itās slightly easier to use the phone.
This thing is legit, but why is their example photo showing a laundry machine next to a kitchen sink as part of a whole kitchen set up lol
I think thatās supposed to be a laundry room, or at least what seems like a reasonable laundry room to people who think $1,500 is a reasonable price for just a washing machine.
Why would you abuse a washing machine? How much do you have to wash that such a machine would not be a complete waste of resources and money?
You donāt buy a truck just because every container is moved by trucks when all you transport is yourself and a bag.
I actually canāt believe anybody would be stupid enough to think that Wi-Fi ever needed to be on a washing machine. That is literally a idea designed to milk extra money from suckerās.
I meanā¦ Itās not absolutely necessary? Yes.
Itās nice that it alerts you is finished specially taking into account it doesnāt always takes the same time and all that ? Yes
A beep or similar works too? Yes, but sometimes you are not near enough or similar and could be useful.
Or starting it remotely so when you reach home just finished or nearly and just arrive and hang the clothes.
I worked for an industrial tool manufacturer for a couple years. Itās well known brand but not one you can just go to Home Depot and buy. Their tools are very specialized and very expensive.
Anyway, the last project I was on before I left was one where they tried to create smart tools. It wasnāt a completely bad idea. Those things have specific maintenance requirements. Reminding the user that itās time for maintenance based on a cycle count, hour count, or severity of conditions was actually a good idea.
But, management wanted two things: Wireless charging, and the ability to feed data from the tool back to a dashboard that the user could log into. Then, they would charge a premium for the āsmart toolā and get the customer to pay for access to the dashboard. At least that was the idea. The problem was that customers didnāt give a shit about either of those āfeatures.ā They just wanted their tools to work reliably. The division president refused to listen. I donāt know how it worked out. For unrelated reasons, I didnāt hang around long enough to find out.
Adding [unnecessary] electronics to tools and appliances is cheap. Thereās some engineering costs involved but once thatās done, the components usually amount to a small fraction of the overall build cost. And the markup is insane, which is one reason why they add those āfeaturesā.
I suspect that thereās plenty of engineering teams out there questioning why a stove needs WiFi and then getting overridden by some SVP who has literally never used a stove in his entire life.
But what if you are privacy conscious and poor?
We bought an āanalogā washer and dryer for my wife and I when we moved into our first home. Hasnāt failed us yet. Her parents have a fancy set and theyāve had to get it fixed a few times already. Seems like the simpler the better for home appliances