I was actually surprised to know that data transmission is doable on ham radio. Not sure why I was surprised since data transmission is possible through pretty much any protocol but it was cool to know the versatility of what many see as pretty basic radio.
Oh yeah, there are modes like DMR and YSF that are completely digital data. That really helps a lot because with analog, the further you got away from the repeater you are using, the scratchier your voice would become until you just weren’t understandable. With digital, you either make the system or you don’t. There’s no real in-between. You’re either able to be heard or you’re not. But if you are not able to be heard, your radio immediately notifies you.
Used to work with a radio enthusiast on sailing ships, he’d make posts to social media and check his email literally 1000 miles out to sea via radio.
Check out “slow scan tv” if you haven’t already. I have my amateur license and was surprised to learn all of the ways in which radio waves can be utilized
I first learned about SSTV over a decade ago from Portal! I remember I had to get a two sided 3.5mm audio cable to plug my computer’s speaker. https://youtu.be/DlIvnc-AZJQ (Video of someone decoding it.)
I’m really close to being ready to do the test for my HAM license. It’s been enlightening to see all the applications and components tied to it. For anyone interested, even just getting started with a simple SDR setup can get you going on learning the basics about the various bands and intricacies involved.
I saw the most amazing thing. You know those meshtastic devices? Well, apparently, somebody has made something like that. Exactly for amateur radio operators, and you can text message and location share, etc. with one watt of power. I think the meshtastic devices are probably limited to 0.1 watts of power. So that would be a major, major improvement. You just plug this tiny box into the USB Type-C port on your phone and it becomes a one-watt HT with voice and text capability. Or at least I think it said it had voice.
Oh that’s really neat. It would be extremely helpful for situations like the hurricanes in the US these past months.
Yeah, tell me about it. And apparently, it only takes $35 worth of components and a 3D printer to build it.
In preparing to get my ticket in 2020, I hopped on the Utah WebSDR and even got a shortwave listener (SWL) QSL card from a guy in the Cook Islands (E51JD).
Earlier this year I made a two-way QSL (contact) with him using my rig and 100W.
There’s a ton to learn, do, or accomplish if you want. So many facets to amateur radio.
I’m working on CW now!
I don’t think smart phones are conventional communications. The are smart. They are still the “tech of tomorrow”.
Smart phones use conventional communications to do very clever things. But those clever things are range limited and require specialised equipment. They also have absolutely no “hackability” without specialised equipment (easy to get, sure… But still pretty much single purpose)
AM is literally a couple caps, inductors, resistors (edit: and diode) then an amplifier (a couple transistors and resistors). And the range of lower frequency radio waves is (or can be) phenomenal.
It’s just that it takes some experience to operate on these frequencies, and their bandwidth is limited.
Smart phones do away with the experience requirements, and trade higher frequencies & higher data rates for range (and I guess trade digital encoding for simplicity)
I see parallels to software.
People are nervous to “side loading apps” on their phone, but have no issues downloading and installing an exe on windows.
Smart phones give you the “this is how” kind of experience, and abstract away the sheer amount of technology they leverage. Which is amazing, and is what makes them smart!
But the underlying technology is phenomenal. And I feel it’s a shame that the majority of people don’t have any understanding of “installing an app” or similar (like calling internet access “WiFi”… 2 distinct things!)
On the other hand. Actual ham radio needs exotic and antiquated equipment, and for all of that you will get a clunky walkie-talkie that can’t do the walkie part and has extremely limited bandwidth, that would collapse if even 0.1% of the population tried using it.
If you do have all the gear and license and just tried to find how to send even 2400 bits per second to another ham radio operator, it would take weeks just to find one another and setup this feat of engineering.
Modulations are obsolete, not even QAM64. There has been no attempt beam forming on HF so there is only very few channels that can be used concurently.
All in all it’s like CB but with extra steps.
A hobby, not a reliable, practical method of mass communication and very stuck in its ways where preserving the spectrum is more valued than communication.
You kinda made my point with the whole “try and find another operator to send 2400bps to” part.
The digital communication is not conventional, it’s revolutionary.
Analog communication is conventional. And radios and their components aren’t exotic.
Yes, modern communication is fantastic. But analog will still be more reliable
“Fragility” is the typical descriptor for this sort of thing. Advanced technology is very powerful, and that is obvious to see, but it also tends to fail readily without long-term planning, in disaster and war, of course, but also in more benign ways, like when a consumer becomes reliant on the technology for a way of life, and a corporation abused their unique ability to maintain the technology, and the consumer has no recourse.
Ham does require that one studies electric engineering (to a some level) and passes a test to acquire a license. Some of the equipment can either kill you or cause way too much interference potentially killing others indirectly
killing others indirectly
Huh. I wonder how you do that. If the wind knocked down a tree and the tree killed someone, would the wind indirectly have killed someone? That’s kind of like the old adage “speed doesn’t kill, it’s the sudden stop”
If you’re fucking around with your radio equipment doing something you shouldn’t and end up causing interference on, for example, aircraft frequencies or emergency service radio systems, you could be a contributing factor to an airliner crashing or an ambulance not being dispatched in a timely manner and a patient dying because they didn’t get to the hospital in time.
You didn’t directly kill anyone, but you set up the circumstances that resulted in someone dying.
Not for nothing but I got my novice and tech license in grade school.
I didn’t know what the hell I was doing. Looking back it was basically brain dumping (and learning code well enough to pass the 5WPM test).
Ended up getting 13WPM and general and advanced in 7th grade.
I still have my license, just renewed it a couple months ago. But haven’t keyed up in maybe 15 years. Ain’t nobody got time for that. I just got a little handheld transceiver on temu and haven’t used it at all.
I always say this when someone asks why I am interested in radio, when you can make phone calls for free from pretty much anywhere to anywhere else.
One day, all that infrastructure may be switched off, or just gone. But I’ll be able to take a piece of wire, hoist it into the air and have a two way conversation with people thousands of miles away.
It’s also just very interesting I think, the way the signals are propagated differently at different wavelengths at different times.
Never been a better time to get into HF communications I think. You can get fairly inexpensive (comparatively anyway) Chinese software defined radio by Xiegu, and literally just stick a long wire in the back as an antenna and since the radio has an auto tuner, all you need to do is get that wire as high in the air as possible. I don’t have that radio so I use a manual tuner but a setup like that is the only way I can get on the air from my current house.
Never been a better time to get into HF communications I think.
Also because the sun is in the middle of some kind of ~10 year cycle that means a ton of sun spots! That makes propagation go further.
Yeah, we’re not too too far removed from the last solar minimum either, so we got a good deal of solar cycle left before the next minimum too. I say this all the time but hams are the coolest sun worshiping group I’ve ever been a part of.
What will the auto tuner in that radio handle? I have an ICOM 7300 and it will handle 3 to 1 SWR and I think it will handle 10 to 1 with lower power in an emergency mode setting. But I use a manual tuner myself.
Ive heard people say that they can get their random wire antennas fed right into the g90 with little issue, I don’t have the tech specs but Id assume its near 9 to 1 if their random wire is working, and that’s made me curious to try the unit since I don’t have any SDR yet. The unit only pumps out 20w max so thats probably a factor. On my Yaesu ft 891where I can run 100w easy I use an external LC tuner and a counterpoise to mitigate rf buildup on the chassis though.
That’s actually pretty impressive if they can just feed a random wire directly into it and get it to transmit.
