I learned this when I was a wee lad: I was playing Runescape and trying to solve a quest I was stuck on with a walkthrough. The guide said that the macguffin was on the first floor of some building, and I must have spent hours looking on the ground floor with no luck.
I finally asked my big brother for help and he said, “Have you tried looking upstairs?” And there it was, blew my mind.
In the US we use either 1st floor and Ground floor to refer to the same floor. The second and higher floors are consistently named though, except for those buildings that skip the 13th floor.
except for those buildings that skip the 13th floor.
When I was in Malaysia, buildings marked floors in British English and skipped any number ending in four (bad luck for Chinese). #MildlyInfuriating
Not always, nothing like the US and inconsistency, I work in the northeast US on a college campus our buildings have G-1-2-3…even the newer buildings follow it.
When your country is made of tiny countries (states) with comparable sizes and populations to European countries there are always going to be exceptions.
It genuinely seems asinine to me to call the floor above the ground floor the first floor.
It would be if you did it in the US, where everybody knows the ground floor is the first floor. Here in Europe, it’s just taught that way from birth, so everybody knows that the first floor is above ground and there’s no confusion.
I understand not getting confused. That doesn’t mean calling the second floor that you put your feet on “the first floor” makes sense.
I’m American and I often think we do things wrong…
but not this. First floor on the SECOND floor. It’s just wrong.
Right, the first floor after you ascend from the… Initial floor, which is on the ground, QED.
We think of it as the first floor that is above the level of the ground - the planet supplies ground level, we just count every level we put above it.
Exactly. In most countries, you reason that you never need to count floors unless you are going up or down. If you are walking up stairs, each floor you go past, you count it: F1, F2, F3, etc. If you are walking down stairs, you count each floor you go past: B1, B2, B3, etc.
Americans think about it more like a cake. Each “story” or “floor” is a ~3m or 4m, floor-to-ceiling, architectural layer. You don’t look at a 3-layer cake and say “that cake has a ground layer, then a first layer and a second layer” you say “that cake has three layers”.
So I’m on the top floor of a 2 story house (floor 1 in British). You’re on the ground floor. Would you say that I’m “up on the first floor” if someone asked where I was? That seems very weird to me.
Essentially, yes. All of the surface of planet earth is ground level to us, whether a building exists there or not. You would then be on the first (man made) floor above the ground. Even a tent has a ground floor. Think of the ground as zero. Anything above counts upwards. Anything below downwards.
Agreed. Go outside and count the concentric rings that go upwards. Do you ever start with 0 counting anything else in existence??? No it’s 1 or L but #2 is 2.
You are completely wrong.
Imagine assigning to each floor a whole number.
Every time you go down a floor, the number should be decremented by 1, every time you go up a floor the number should be incremented by 1.
In order to get symmetry, floor 0 should be the ground floor - not floor 1. What maniac would assign floor 0 to the first basement floor?
Yes, but I was talking about assigning numbers from a logical perspective, not a conventional one.
Also, why is it called B1 for the first basement floor but not E1 (for elevated) for the floor above ground floor?
Don’t you see how that’s such an obviously ugly and mathematically unsatisfying retrofit to make your shit work?
B2 B1 1 2 3
vs
-2 -1 0 1 2
And what the hell do you even do in a situation where 0 is at street level but -1 opens on a backyard or something. It’s clearly not a basement, but it’s clearly not the ground floor either.
Or do you never build an elevator in such buildings in order not to trigger massive cognitive dissonance?
EDIT: Holy shit there is another layer to this hypocrisy cake. Americans swear up and down that they have to write “12/11” because they say “12th of September”, but their floor notation is literally “B1” for “First Basement”. Clearly the only rule they follow is that they’ll do whatever is least logical and convenient just to piss off everyone who is forced to work with them.
In order to get symmetry, floor 0 should be the ground floor
Floor 0 is “not in the building”, nobody calls first/ground “0” in reality
Then, we apply your own logic of adding a floor on going up to include “going in” and vice versa for “going out” and we get why the US does it the way we do
I don’t get what you’re saying. Why wouldn’t floor 0 be in the building if we started assigning numbers to floors?
As someone who will die on the hill that USC/Imperial is worse than (or the same as) metric in every single way:
Yeah, the British are idiots, and we Australians also use their confusing system too. I hate it.
The ground level is the first level you walk into, this should be 1.
Expressed another way:
— 2
Level 2: between floor (the actual floor) (1,2)
— 1
Level 1: (0,1)
— 0, The ground
Level B1: (-1,0)
— -1
Etc
In the international system (the one Americans use) you are concerned where your head is.
The British system wants to know where your feet are.
The American (and many other countries) system makes way more sense.
The ground floor is the first floor.
This makes as much sense as those people that defend Fahrenheit by saying “30 degrees can’t be warm, its cold!” - your own reference is to what you’re used to calling it.
Celsius is no more scientific than Fahrenheit, as it’s also based on water at sea level, not some universal measurement.
So it’s no more valid than F.
Kelvin is based on absolute zero, at least.
It’s the first floor above the ground level (or the first floor that you have to start calling a separate name, because if everything is single level you don’t need to specify a floor).
What’s crazy is that it’s not consistent by language. Obviously we have British/Aussie/Kiwi vs US/Canadian English, but the Spanish speaking world is also fractured.
And not even by otherwise closely related geographical regions. The Nordics, one of the world’s most internally cooperative group of countries, have Sweden and Denmark using the English British system, and Finland and Norway using the British American system.
Edit: I’m a dumbass
Did you mean to say American for one of those systems? England is part of Great Britain.
Antarctica is mixed… that means there are at least two multifloor buildings there… and they couldn’t agree on it
What? Why? On the east coast I’ve mostly seen ground as first floor. Sometimes below ground is counted though.
I’ve worked on a few buildings in Quebec that all use the European style. hate it!
Never understood how ground floor and first floor aren’t always synonymous. If the ground floor is a floor, then how could it not be the first of the floors?
They might think of it as zero floor as if you were dealing with the decimal system. You even start your number count with a zero in computer science.
Kinda weird to have a floor 0, though, right? People outside of computer science generally start counting at 1. Like I said before - the first floor you step on is the first floor. To say it’s the 0th floor would make me think it’s a hypothetical floor that doesn’t exist, which is usually what 0 signifies.
We never say 0 though, we say ground. If it’s written down it’s -2, -1, G, 1, 2 etc, which by chance makes it a bit easier represented by the decimal system and in computer science.