…to a reasonable degree, at least.
Weddings.
Yes, It IS a big day. It’s not such a big day that you spend your entire life savings, and have no future.
Get a DJ, get a cake, get a hall, get a photographer…forget the doves, forget the ice sculptures, forget the wedding planner, forget the genocidial mimes, forget the big limo, keep it small. Do you really need to invite your great aunt, who you’ve seen 3 times in your life?
You should NOT be spending like $20,000 on a wedding.
$20k?
Damn dude, all my friends getting married are spending a minimum of $50k. $15k gets you the venue for the night without anything else included or factored in (food, music, fucking chairs or tables or lights, etc)
Weddings are a predatory business.
I can get a venue for like $200. What are you guys renting??? The Royal Palace???
It varies a LOT regionally.
Look for a venue in Maryland, you know, with DC right there.
I have a friend who’s entire wedding was the same price as a venue in Maryland.
We got married in DC and saved so much money on locations. We booked the Jefferson memorial 6 months in advance for like $50 (saved a couple thousand), and a boathouse on the Potomac for $800 (saved 8-20 grand) because we knew someone - wedding still cost like 33k. We were so cognizant of cost too - no flowers at all, DJ instead of a band, bought our own booze, etc.
I think people don’t realize how much more expensive cities are, and also do a terrible job accounting for all the true costs of things. Food was obviously the bulk of it and other big things like booze, rings… But I kept impeccable records, and what really added up was the little $100 here, $300 there things. Hotel and plane tickets for destitute father-in-law, all the meals at restaurants you’re taste testing to see if you wanna have the rehearsal dinner there, tips, food while the bridal party is getting ready, gifts for bridal party, the officiant, etc etc.
I wouldn’t trade it for the money back because I’m notoriously cheap, so I pinched and saved and was super proud of our wedding’s price to quality ratio, but I’d be lying if I said the final tally wasn’t super painful and didn’t delay our house a bit. It worked out in the end, though. Thanks interest rates!
We got out cheap at about $25… we had a smaller (100 person) wedding, went budget on the food, had a DJ, cake, etc. (basically just what the OP said), and we were still hand crafting stuff to reduce the cost. Shit is fucking expensive.
A friend of mine donned his nicest clothes and went down to the courthouse with his fiance and a couple of witnesses. I mentioned this to my sister, and she mentioned that in retrospect, she wished she’d done something similar when she got married.
Spent less than 1k, no real honeymoon…but we bought our first house with the money we saved. 0 regrets.
I laugh when I hear some couple spent $20k on their wedding but can’t buy a house. Dude, that could have been your down payment wtf.
My brother’s father-in-law had offered to pay up to $15,000 for his daughter’s wedding. He gave them the option of taking it all in cash and then getting a courthouse wedding so they could have a nest egg to grow, or spend it all on the wedding of his fiancée’s dreams, or anywhere in between.
She opted to spend it all on the wedding. 😒 My gawd did that piss me off.
I’m in agreement except for the wedding planner. Whether they help with the planning from day one or are just the day-of coordinator, a good wedding planner is worth their weight in gold. I’d rather plug an old mp3 player into a portable speaker and skip the DJ before I recommend skipping out on the planner.
Oh, by DJ, yeah, thats all he’d be doing is controlling the winamp playlist basically.
And a wedding planner I don’t see as being needed.
Step 1) rent local venue.
Step 2) ask cousin to be DJ.
Step 3) pick up cake from dairy queen.
Step 4) Flowers??? I’m sure the florist can figure something out.
Thats about it.
eh, as a photographer that works weddings, any wedding without a planner is hell for me. i might actually just say no if that’s the case.
if you hire people to work it you should have a person who can be their go to while you are getting married.
if you go for an event like you describe people will be unhappy at the lack of food and leave after not long. if that’s what you want, good for you. go for it. if you want people to stick around and have a good time, you need to feed them. that’s expensive, even if you somehow make it all yourself with food from the farmers market, it’s still going to be over a thousand dollars for most people. again, unless you only invite like five people, but most people care about more than 5 people. throwing a big party of any kind isn’t cheap unless you throw a terrible party.
you don’t have to have a traditional wedding at all though. my sister got married during COVID in her backyard on video call. it was lovely. a big beautiful wedding with lots of people is also lovely and uniquely fun. just don’t let you relatives pressure you into things you don’t want. there’s where it always goes wrong.
Our wedding was under 5k, excluding dress and suit. Immediate family and close friends only, less than 40 people. Major expenses were the photographer, food and booze. We rented a cheap, small place in the countryside, we planned and did everything else ourselves, having a kanban board in the kitchen for a year was fun! My wife even did the cakes herself because she’s an amazing amateur pastry chef. No DJ, but I spent months on and off curating a playlist with a good flow and steadily increasing intensity.
It was the perfect wedding. Huge amount of work but 100% worth it.
Go, and preach this gospel to SE asian families, I beg you.
Getting away with a wedding for under 80k sometimes is considered “cheap” by those standards. And you absolutely must invite your third cousin once removed and your nextdoor neighbor who you hate. You see him every day afterall!
Here’s my pro tip.
You want a unique picturesque wedding on a budget?
National Parks in the US. If you keep your guest list under 50 people, you can get married anywhere in the park, provided you don’t block access, put up decorations, or damage the park, and it’s free! If you have more than 50 people, you need a permit, and those are raffled off per day, and almost no one uses them.
I got married on the bluffs overlooking Little Hunter’s Beach in Acadia National Park. The drive, food, and lodging for my wedding there cost less than the first payment for the venue of my “local” ceremony in my home city, which we ended up canceling anyway.
Absolutely! Making it memorable and fun does not mean making it expensive. Cut whatever you can’t afford, do not take out a loan to cover anything. Then cut anything that isn’t meaningful to you and your partner.
A wedding planner is helpful if you don’t have a trusted and naturally organized friend who volunteers to handle details for you.
I’d also recommend taking a local honeymoon.
My wife and I spent $350 altogether for the paperwork and an officiant. We eloped beneath a tree in a park with her family present, and afterward I returned my dress shirt to Walmart for a refund. I will never regret how low-class that was.
We’ve been married now for ten years.
Mine cost $150. $70 for the license and $80 for the JP to do their thing.
I’m sure JP stands for something reasonable, and that makes sense, but my mind struggles against itself, and all I can imagine is it stands for “Japanese” and also my brain things “Jurassic Park”.
So even though I’m 100% confident that this DIDN’T happen, I’m just imagining your wedding, with people sitting down, waiting for the bride to walk the isle…meanwhile, over by the other side of the room are bunch of Japanese cosplayers all recreating scenes from Jurassic Park. Complete with inflatable dinosaurs and .wav files of dinosaur sounds.
All the while your guest list is like “WTF is even happening over there???”
I’m sorry. I don’t know what ACTUALLY happened at your wedding, but it would have been a HUGE upgrade if you had dinosaur fights, and Japanese cosplayers.
If you’re not a contractor, power tools. Buy the harbor freight version first when you need it. If you end up using it enough to break it, then you get a quality one.
I have never broken a 10 mm wrench, but I have lost a few. So I bought a ten pack on Amazon.
It’s always the 10!
I keep one in my center console, my keychain, and random cheapies mixed in around loose tools, on top of whatever is part of the sets. Periodically we’ll still have a hard time finding one when its needed and have to replenish.
Are they hanging out with the lost socks?
Sorry, but this only applies to drills and sanding machines. Maybe a bench grinder also you can cheap out on. Hand tools are fine to cheap out on also.
Circular saw, table saws, miter saws, angle grinders, etc…
Any spinning blade, if you cheap out, don’t be surprised if you get life-alteringly injured when you “use it enough to break it”. I was just helping some friends renovate where they had a dirt cheap miter saw and it was just about the most dangerous experience of my life.
If you are doing any big renovations, at least get makita, Milwaukee, or dewalt. You can get a TON of cheaper stuff second hand. Quality at a lower price. I got a professional older model hilti hammer drill at a tiny fraction of the price.
It really depends anymore…it can be a tough call.
I grew up using only quality tools, because cheap tools were truly shit until perhaps the 90’s, at the earliest.
HF tools used to be utter shit, but their “branded” tools are good these days. The wrenches and sockets are as good a Craftsman used to be, and equal to the store brands from Home Depot and Lowes. And overpriced Matco/Snap On can kiss my ass. I have some of their tools, they’re nice, but not worth the price.
Their branded cordless tools are good too. One thing they do differently is put the battery controller in the tool, while Milwaukee puts one in the battery. So don’t do anything foolish with the battery.
I don’t think they’re as durable as Milwaukee, the plastic seems harder, so more prone to cracking. And the warranty isn’t very long.
But with the massive cost difference, it’s a good place to start.
But exactly, that is the difference between a drill and spinning sharp metal at high speeds.
If a drill breaks, it isn’t going to send shards of metal-cutting fiber disc 20 meters per second at your face.
If a saw sucks ass like the one I used a few days ago, you can’t safely cut through wood and you end up doing dangerous things like putting your body weight on the top of the miter saw to get it down all the way, gripping the piece closer to the blade to try to get it to cut better with less tear out or to not slip, etc… which can easily lead to a finger being cut off. It is MUCH more expensive in the US especially to have to deal with a dismembered finger than the cost difference between a chinese amazon $100 miter saw and $200 entry level 10 inch dewalt.
There are a ton of people who can’t afford that. That is fine. Then spend $100 on good quality assorted hand saws. a $40 japanese pull saw, $30 for a Spear & Jackson hand saw, $40 for a pair of bacco chisels, and an angle cut box and you can do a lot more than that $100 miter saw much more safely at the cost of it being at half the speed.
That is something I would disagree with. Especially when it comes to battery powered tools which seems to be everything nowadays.
If you go with one of the big brands you are almost guaranteed to get a spare part later. If you only use your drill once a year, the battery might be dead in a few years if you don’t take care of it. Of course your battery might cost the same as a no name drill, but that is still a fair point IMO.
Now that you have a drill maybe you need a saw later. If you went with a big brand they typically have a large range of devices that work with the same batteries. So you can reuse your battery from the drill and also don’t need another charger for that single device. This is also not limited to tools only. Maybe you need a light or a battery powered radio for something totally unrelated.
This is very situational. I’m not a contractor, but I spend a significant portion of my time doing hobbies that require power tools. I don’t need a drill that will last for an entire day at a jobsite. Ryobi works fine for me. On the other hand, I wish I had never spent $600 on a cheap planer; I knew I’d want a better one eventually, and sure enough, I found a need to upgrade after a few years. Now I’ve spent $3600 on planers. I could have just gone with the $3k one and saved myself $600.
If I’m going to use it once, I borrow it. If I’m going to use it every few months, I buy a cheap one. If I’m going to use it every week, then it’s worth it to me to buy something I can keep for at least a decade or two.
Pretty good for anything that can kill you if it fails. Even beyond power tools.
So, for example, yes to drill. No to compressors, jacks, etc.
For jacks I always assume that it can break at any moment. That is why I put the spare tire under the car when I have the car lifted. If the jack breaks, the car will fall on the tire and not on my face.
Unpopular opinion but wine.
From my experience majority of people can’t distinguish between 5€ wine and 500€ wine. And even if they do, they say it tastes “a bit better”, not worth the 495€ difference. Pick one that tastes good to you and don’t be ashamed if it’s cheap.
I will disagree with a caveat. Basically yes there is a difference between wines, and it’s not BS.
There is a world of a difference between a $5 and a $500 wine. But there isn’t a world of a difference between a $5 and a $30 wine, nor is there a world of difference between a $500 and a $1000. It’s about a class structure of the product as with so many things. There’s cheap and simple and there’s more sophisticated and expensive. But once you’re comparing within the same class, it’s really just a matter of varying subtleties. There’s certain distinctions that are absolutely distinguishable such as dry, sweet etc. and there are undertones. This stuff is absolutely real so if someone says it’s all nonsense that someone has not really had the experience needed to make that kind of judgment.
I drink between $5 and $500 bottles, and while I will agree there is a distinct difference at the higher end, it doesn’t mean the $500 bottle will be better than a $20 bottle to the person drinking it. I humor the people that care about the price, but distinct notes of so-so music doesn’t spin my wheels.
Yeah, no it’s all a question of the person’s relationship with wine, as with other things. If you are perfectly fine with a cheap wine then yeah, plenty of them are delicious. But a connoisseur can and will appreciate what a $500 wine offers them, and it’s not qualities you can find in any $5 bottle.
Like with many things, if you appreciate the higher-end selections among them, then you’re getting something you can’t at the low end. The question is, even with those qualities, is it really worth $500? And that’s just a matter of economics.
When my son was born I got a $100 bottle of Glenlivet 18 year French Oak Finish. That’s a rather sophisticated single malt; by no means is it the best because I know people who have bourbon or scotch that costs like 5x that. However, you will not anywhere or anytime find a cheap scotch that even comes close to that Glenlivet. It was some of the smoothest and most delicious single malt I’ve ever had. Lasted me nearly a year.
Sigh. Due to a medical condition I don’t consume alcohol anymore, and haven’t for a long time. But goddamn do I miss good scotch, bourbon, beer… sigh.
I’m not much of wine drinker myself, but I once did a chef menu with the wine pairing. Every two dishes, they’d bring out a new glass of wine. It was kind blowing how the would taste one way with the first dish and a completely different way with the second dish. I’m not sure I can tell the difference between a $12 bottle and $40 bottle, but in that one meal i understood two things: first, if you know what your doing, wine and food pairings can be magical and, second, I don’t know what I’m doing.
I’m far from a wine connoisseur and my favorite is an $8 rosé wine you can find at your local grocery store.
Wine is a huge scam.
Sommeliers are just salespeople making shit up.
It’s bullshit, you don’t detect notes of 15 different things all mixed together.
Seems something like [Proportion of People OK w/the Wine] - [Price] might be:
50% - $5
75% - $10
90% - $20
95% - $30
99% - $50
I made all of this up. Who actually drinks wine? Did I come close to your made-up numbers?
Also assume some of the highest-rated wines at each price point for consumers who appreciate that style in general.
Depending on the country, and where you shop. You should spend more if you can tell the difference, but not more than that.
On the expensive end you are paying for the famous canteen+region, and if you go to a wine shop you could find something from a less known vineyard that is as good for less.
There are so many great tasting cheap wines! My favorite is about $16-18 or so but I’m perfectly happy with $4-8 wine too. I will agree though that there are some extremely interesting and complex flavors to be found in the high end stuff that I find very compelling, and can understand the appeal of, but I ain’t paying for it.
Video games. Unless it’s a game I play with friends I typically wait for it to drop in price significantly.
Apparentlyv Mr Clean MagicErasers are just melamine sponges which are actually mucho cheapo
I buy the giant blocks of 100 generic melamine sponges from Amazon.
However, having a couple of the Mr clean versions around is prudent. They are slightly different. They deform more easily and disintegrate faster but they get deeper into crevices. It’s super rare that I find something that generic ones won’t do a great job on but it’s good to have a couple of the name brand ones for that time when they don’t cut it.
